Decision on the Concept of a Unified Information Marking System for Explosives, Ammunition and Firearms of the Member States of the Commonwealth of Independent States
Decision of the Council of Heads of States of the Commonwealth of Independent States dated June 3, 2005
The Council of Heads of Government of the Commonwealth of Independent States
decided:
- To approve the Concept of a Unified Information Marking System for Explosives, Ammunition and Firearms of the Member States of the Commonwealth of Independent States (attached).
- This Decision shall enter into force from the date of its signing, and for states whose legislation requires the completion of domestic procedures necessary for its entry into force, from the date of submission of the relevant notification to the depositary.
Done in the city of Tbilisi on June 3, 2005, in one original copy in the Russian language. The original shall be kept by the Executive Committee of the Commonwealth of Independent States, which shall send each state that has signed this Decision a certified copy thereof.
For the Government of the Republic of Azerbaijan For the Government of the Republic of Moldova
For the Government of the Republic of Armenia For the Government of the Russian Federation
For the Government of the Republic of Belarus For the Government of the Republic of Tajikistan
For the Government of Georgia For the Government of Turkmenistan
For the Government of the Republic of Kazakhstan For the Government of the Republic of Uzbekistan
For the Government of the Kyrgyz Republic For the Government of Ukraine
Approved by the Decision of the Council of Heads of Government of the CIS on the Concept of a Unified Information Marking System for Explosives, Ammunition and Firearms of the Member States of the Commonwealth of Independent States dated June 3, 2005
CONCEPT OF A UNIFIED INFORMATION MARKING SYSTEM FOR EXPLOSIVES, AMMUNITION AND FIREARMS OF THE MEMBER STATES OF THE COMMONWEALTH OF INDEPENDENT STATES
Contents
- Introduction
- Basic Concepts
- Objectives
- Structure and Implementation Mechanism
- Basic Requirements for Information Marking of Explosives, Ammunition and Firearms
- Basic Elements of Information Marking of Explosives, Ammunition and Firearms
- Documentation Containing Information on the Information Marking of Explosives, Ammunition and Firearms
- State Cadastre and Exchange of Information Necessary for the Identification of Explosives, Ammunition and Firearms Bearing Information Markings
Appendix 1. Code Designations of CIS Member States for Information Marking of Explosives, Ammunition and Firearms (extract from International Standard ISO 3166-93 "Codes for the Representation of Names of Countries").
Appendix 2. Examples of Code Designations for Information Marking of Explosives, Ammunition and Firearms.
Appendix 3. Examples of the Design of Microcarriers with Information Markings.
Appendix 4. Indicative List of Documents for Explosives, Ammunition and Firearms Bearing Information Markings.
1. Introduction
The Concept of a Unified Information Marking System for Explosives, Ammunition and Firearms of the Member States of the Commonwealth of Independent States (hereinafter referred to as the Concept) defines the objectives, structure and uniform requirements for information marking of explosives, ammunition and firearms.
The Concept serves as the basis for the development of interstate and national standards, regulatory documents, technical, forensic and other requirements in the field of information marking of explosives, ammunition and firearms manufactured and/or marked within the territories of the states participating in the Concept (hereinafter referred to as the participating states).
The principles of information marking set out in the Concept may serve as the basis for the unification of marking rules for all types of weapons, armaments, military equipment and their components, as well as dual-use equipment and components, the development, manufacture, assembly, modification, marking, import, export, acquisition, sale, delivery, movement or transfer of which is subject to a permit system in a participating state.
The requirements of the Concept shall not apply to ammunition and firearms having historical and cultural value, as well as to explosives, ammunition and firearms manufactured and in service prior to the entry into force of the relevant international instruments.
2. Basic Concepts
The concepts used in the Concept shall have the following meanings:
"firearm" – a weapon designed to mechanically strike a target at a distance by means of a projectile that receives directional movement through the energy of gases generated by the combustion of a propellant charge;
"ammunition" – a single-use military equipment item designed to destroy a target or perform tasks contributing to the destruction of a target, or to impede the actions of an adversary, and containing an explosive, propellant, pyrotechnic or ejection charge, or a combination thereof;
"explosive substance" – a condensed chemical substance or a mixture of such substances capable, under certain conditions and under the influence of external effects, of undergoing a rapid self-propagating chemical transformation (explosion) with the release of a large amount of heat and gaseous products;
"manufacturer" – a person who develops, manufactures, assembles, modifies, processes or marks explosives, ammunition and firearms;
"user" – a person who, in accordance with the procedure established by national legislation, has the right to use explosives, ammunition and firearms for their intended purpose or to dispose of them;
"recipient" – a person who, in accordance with the procedure established by national legislation, has the right to receive explosives, ammunition and firearms from a manufacturer or user and does not have the right to use the explosives, ammunition and firearms received for their intended purpose or to dispose of them, but is obliged to transfer the explosives, ammunition and firearms received to another recipient, user or manufacturer;
"manufactured batch" – a specified quantity of explosive substance or ammunition manufactured and marked in the same manner by one manufacturer;
"information marking certificate" – a document certifying that the manufactured and marked firearm, batch of explosives or ammunition bears an information marking with a unique number, duly executed;
"appendix to a copy of the information marking certificate" – a document certifying that a part of a manufactured and/or marked batch of explosives or ammunition, which is accompanied by that document, bears an information marking with a unique number, duly executed;
"illicit trafficking" – the circulation of explosives, ammunition and firearms carried out in violation of the national legislation of the participating states;
"microcarrier" – the main marking element containing the information necessary for identifying an explosive substance, ammunition or firearm.
3. Objectives
The Unified Information Marking System for Explosives, Ammunition and Firearms of the participating states is intended to fulfil the following objectives:
- carrying out coordinated activities and promoting the development and strengthening of cooperation between the participating states in combating terrorism, organized crime and illicit trafficking in explosives, ammunition and firearms;
- providing assistance to the competent authorities of the participating states in investigating acts of terrorism, organized criminal activities and illicit trafficking in explosives, ammunition and firearms;
- ensuring the possibility of identifying explosives, ammunition and firearms and monitoring their circulation;
- ensuring the possibility of preparing, registering and maintaining unified accounting and reporting documents accompanying the circulation of explosives, ammunition and firearms.
4. Structure and Implementation Mechanism
4.1. The Unified Information Marking System for Explosives, Ammunition and Firearms of the participating states is a multi-level system comprising:
- the interstate level;
- the state level;
- the level of competent authorities of the participating states;
- the level of manufacturers of explosives, ammunition and firearms.
4.2. At the interstate level:
- coordinated measures of the participating states shall be adopted and implemented;
- the procedure for transferring information on marked explosives, ammunition and firearms of the participating states shall be approved, and the level of officials authorized to make the relevant requests shall be established;
- measures shall be taken to develop joint research activities aimed at increasing technical capabilities for identifying the necessary information about explosives, ammunition and firearms.
4.3. At the state level:
- a decision shall be made on the procedure for introducing the Unified Information Marking System for Explosives, Ammunition and Firearms of the participating states within the territory of the relevant state;
- the procedure for the material, technical and financial support of the Unified Information Marking System for Explosives, Ammunition and Firearms of the participating states shall be determined;
- regulatory legal acts and technical documents regulating the procedure for the functioning of the Unified Information Marking System for Explosives, Ammunition and Firearms of the participating states, as well as the mechanism for transferring information to other participating states, shall be adopted;
- the list of competent authorities, their functions, objectives and powers shall be determined, with subsequent notification of the other participating states;
- the list of manufacturers of explosives, ammunition and firearms and the specific list of their products subject to mandatory marking shall be determined;
- research and development activities shall be carried out for the purpose of improving the Unified Information Marking System for Explosives, Ammunition and Firearms of the participating states.
4.4. At the level of competent authorities of the participating states:
- a unified state policy shall be implemented, functions shall be performed and objectives shall be addressed within the scope of the powers established by the participating state;
- a database of marked explosives, ammunition and firearms shall be operated.
4.5. At the level of manufacturers of explosives, ammunition and firearms:
- direct marking shall be carried out;
- information on marked products shall be submitted in a timely manner to the database and/or the state cadastre.
5. Basic Requirements for Information Marking of Explosives, Ammunition and Firearms
5.1. Information marking shall include an alphabetic and/or numeric code designation enabling:
- specialists from any participating state to determine the country of manufacture of the marked explosives, ammunition and firearms;
- specialists of the competent authority of a participating state to determine the manufacturer of the marked explosives, ammunition and firearms manufactured within the territory of that participating state;
- specialists of the manufacturer to determine the batch number in which the explosive substance or ammunition was manufactured and/or marked, the individual number of the firearm, its user or recipient, as well as the day, month and year of its manufacture.
5.2. Information marking shall ensure the possibility of identifying:
- each manufactured batch of explosives;
- each manufactured batch of ammunition;
- each manufactured unit of firearms.
5.3. Information marking of a manufactured batch of explosives shall make it possible to identify the explosive substance in its container (packaging) without destroying or damaging the container (packaging), as well as any part of it without a container (packaging) having a mass of 10 grams or more.
Where technically feasible, information marking shall make it possible to identify the explosive substance after its detonation.
5.4. Information marking of a manufactured batch of ammunition shall make it possible to identify the ammunition both without destroying or damaging it and after it has been rendered completely unusable or modified in such a way as to prevent its use for its intended purpose.
Where technically feasible, information marking shall make it possible to identify ammunition by its spent cartridge case or bullet (projectile).
5.5. Information marking shall make it possible to identify firearms both without destroying or damaging them and after they have been modified in such a way as to prevent their use for their intended purpose.
Where technically feasible, information marking shall make it possible to identify firearms by their main components.
5.6. The application or introduction of information marking during the manufacture of explosives, ammunition and firearms shall be an integral part of the manufacturing process of explosives, ammunition and firearms.
5.7. When explosives, ammunition and firearms are received from the territory of a state where their information marking is not carried out, information marking shall be performed in accordance with the requirements established by the Concept. In this case, the information marking of the country of the user or recipient of the explosives, ammunition or firearms shall be applied.
6. Basic Elements of Information Marking of Explosives, Ammunition and Firearms
6.1. The alphabetic and numeric code designation used for information marking of an explosive substance, ammunition or firearm shall include:
- the code designation of the state within whose territory the explosive substance, ammunition or firearm was manufactured and/or marked;
- the code designation of the manufacturer of the explosive substance, ammunition or firearm;
- the code designation of the batch and the date of manufacture of the explosive substance, ammunition or firearm.
6.2. The code designation of the state within whose territory the explosive substance, ammunition or firearm was manufactured and/or marked shall be based on International Standard ISO 3166-93 "Codes for the Representation of Names of Countries", developed by the International Organization for Standardization (ISO).
The code designations of the CIS member states for information marking of explosives, ammunition and firearms are provided in Appendix 1.
6.3. The alphabetic and/or numeric code designation of the participating state within whose territory the explosive substance, ammunition or firearm was manufactured or marked shall be placed at the beginning of the information marking and separated from the other part of the code designation by a period.
6.4. The alphabetic and/or numeric code designation of the manufacturer shall be separated from the other part of the code designation by a period and shall not coincide with the alphabetic or numeric code designations of states specified in International Standard ISO 3166-93 "Codes for the Representation of Names of Countries".
6.5. Examples of code designations for information marking of explosives, ammunition and firearms are provided in Appendix 2.
6.6. Information marking shall constitute a microcarrier on which the code designation of the state within whose territory the explosive substance, ammunition or firearm was manufactured and/or marked, the manufacturer's code designation, as well as the code designation of the batch and the date of their manufacture, are applied in the appropriate manner.
6.7. In order to simplify the procedure for locating microcarriers, substances that are phosphors and glow in the visible spectral range when exposed to ultraviolet or infrared radiation shall be used in their manufacture.
6.8. Examples of the design of microcarriers with information markings are provided in Appendix 3.
6.9. Information marking shall be carried out using measures that prevent its destruction, alteration or counterfeiting.
6.10. Information marking that has not been subjected to any impact intended to destroy, alter or counterfeit it shall make it possible:
- for specialists from any participating state to identify and determine the participating state within whose territory the explosive substance, ammunition or firearm was manufactured and/or marked;
- for specialists of the competent authorities and specialists of the manufacturer of the participating state within whose territory the explosive substance, ammunition or firearm was manufactured and/or marked to determine the manufacturer, batch and date.
7. Documentation Containing Information on the Information Marking of Explosives, Ammunition and Firearms
7.1. Information on the information marking of explosives, ammunition and firearms shall be recorded in the following types of documents:
- a register or record card for manufactured and/or marked explosives, ammunition or firearms;
- an information marking certificate for explosives, ammunition or firearms;
- an appendix to a copy of the information marking certificate for explosives, ammunition or firearms;
- a register or record card for received explosives, ammunition or firearms.
7.2. Registers and record cards for manufactured and/or marked explosives, ammunition and firearms containing information on their information marking shall be kept by the manufacturer that manufactured and/or marked the relevant explosives, ammunition and firearms, together with copies of the issued information marking certificates for explosives, ammunition and firearms.
7.3. The information marking certificate for an explosive substance, ammunition or firearm shall be issued by the manufacturer and handed over to the recipient/user upon the transfer of each manufactured batch of explosives, ammunition and each unit of firearms marked with one number.
7.4. When different parts of a batch of explosives or ammunition bearing the same information marking number are transferred to different users/recipients, a copy of the information marking certificate and an appendix to the copy of the information marking certificate shall be prepared for each recipient/user.
The appendix to the copy of the information marking certificate for an explosive substance or ammunition shall be prepared by the recipient/user and handed over to another recipient/user when each part of a batch of explosives or ammunition marked with one number is transferred.
7.5. The information marking certificate and the appendix to the copy of the information marking certificate shall be prepared on a form protected against counterfeiting and bearing a unique series and number.
The information marking certificate shall contain the name, seal and signature of the manufacturer, as well as the manufacturer's confirmation that the relevant unit of firearms or batch of explosives or ammunition has been marked in compliance with the established standards and requirements.
The appendix to the copy of the information marking certificate shall contain the name, seal and signature of the recipient/user who issued it.
The information marking certificate and the appendix to the copy of the information marking certificate shall specify the names of the manufacturer, recipient or user assigned to them by the competent authority of the participating state in accordance with the established procedure.
7.6. Registers and record cards for received explosives, ammunition and firearms containing information on their information marking shall be kept by the recipient/user of the explosives, ammunition and firearms together with copies of the information marking certificates and copies of the appendices to copies of the information marking certificates for the explosives, ammunition and firearms.
7.7. After all parts of the received batch of explosives or ammunition specified in the information marking certificate or in the appendix to the copy of the information marking certificate received with them have been transferred to other recipients/users, or after the explosives or ammunition specified in the information marking certificate or in the appendix to the copy of the information marking certificate received with them have been used for their intended purpose, or after the explosives, ammunition or firearms specified in the information marking certificate or in the appendix to the copy of the information marking certificate received with them have been destroyed in accordance with the established procedure, or have been irretrievably lost, the recipient/user of the explosives, ammunition or firearms shall transfer the originals of the documents received to the competent authority of the participating state.
7.8. The retention period for documentation containing information on the information marking of explosives, ammunition and firearms shall be at least 50 years.
An indicative list of documents for explosives, ammunition and firearms bearing information markings is provided in Appendix 4.
8. State Cadastre and Exchange of Information Necessary for the Identification of Explosives, Ammunition and Firearms Bearing Information Markings
8.1. Each participating state undertakes to maintain a state cadastre of manufactured and/or marked explosives, ammunition and firearms containing information on their information marking.
8.2. The competent authorities of the participating states shall exchange, in accordance with the established procedure, information necessary for the identification of explosives, ammunition and firearms bearing information markings.
Appendix 1
to the Concept of a Unified Information Marking System for Explosives, Ammunition and Firearms of the Member States of the Commonwealth of Independent States
Code Designations of CIS Member States for Information Marking of Explosives, Ammunition and Firearms
(Extract from International Standard ISO 3166-93 "Codes for the Representation of Names of Countries")
| Short and full name of the CIS member state | Alphabetic code alpha-2 | Alphabetic code alpha-3 | Numeric code |
|---|---|---|---|
| Republic of Azerbaijan | AZ | AZE | 031 |
| Republic of Armenia | AM | ARM | 051 |
| Republic of Belarus | BY | BLR | 112 |
| Georgia | GE | GEO | 268 |
| Republic of Kazakhstan | KZ | KAZ | 398 |
| Kyrgyz Republic | KG | KGZ | 417 |
| Republic of Moldova | MD | MDA | 498 |
| Russian Federation | RU | RUS | 643 |
| Republic of Tajikistan | TJ | TJK | 762 |
| Turkmenistan | TM | TKM | 795 |
| Republic of Uzbekistan | UZ | UZB | 860 |
| Ukraine | UA | UKR | 804 |
Appendix 2
to the Concept of a Unified Information Marking System for Explosives, Ammunition and Firearms of the Member States of the Commonwealth of Independent States
Examples of Code Designations for Information Marking of Explosives, Ammunition and Firearms
| No. | Object of Information Marking | Marking Option |
|---|---|---|
| 1. | Firearm manufactured in the Russian Federation | RU.JK01.123456.120323 |
| 2. | Explosive substance in factory packaging manufactured in the Russian Federation | RUS.AAAA.Z03.123459 |
| 3. | Ammunition manufactured in the Russian Federation | RUS.AB77.0X3.123454 |
Note:
- Information marking for firearms includes the following positions separated by periods:
1st – code designation of the CIS member state;
2nd – manufacturer's code;
3rd – code of the individual firearm number;
4th – code of the date of manufacture.
- Information marking for explosives and ammunition includes the following positions separated by periods:
1st – code designation of the CIS member state;
2nd – manufacturer's code;
3rd – batch code;
4th – code of the date of manufacture.
Appendix 3
to the Concept of a Unified Information Marking System for Explosives, Ammunition and Firearms of the Member States of the Commonwealth of Independent States
Examples of the Design of Microcarriers with Information Markings
1. Shapes of information marking microcarriers:
Disk-shaped
Disk diameter: from 0.5 to 1.0 mm
Character height: from 0.05 to 0.1 mm
Appearance of the carrier magnified 50 times
See paper version
Rectangular
Rectangle dimensions: from 0.5 to 1.0 mm
Character height: from 0.05 to 0.1 mm
Appearance of the carrier magnified 50 times
See paper version
2. Information marking microcarrier with characters applied by means of a photographic process, cross-section:
- Transparent base for the emulsion layer made of polymer film
- Emulsion with a photographic image of the information marking characters
- Adhesive layer with phosphor crystals
- Protective coating made of polymer film
3. Information marking microcarrier with characters applied by means of the hot-stamping process using metallized foil, cross-section:
- Transparent base for the metallized coating
- Metallized coating with applied information marking characters
- Adhesive layer with phosphor crystals
- Protective coating made of polymer film
Appendix 4
to the Concept of a Unified Information Marking System for Explosives, Ammunition and Firearms of the Member States of the Commonwealth of Independent States
Indicative List of Documents for Explosives, Ammunition and Firearms Bearing Information Markings
1. Indicative List of Documents for Explosives Bearing Information Markings
| Stages of circulation of explosives | Information marking | Documents containing information on information marking | Place and retention period of documents |
|---|---|---|---|
| Packaging of a batch of explosives | Application of information marking to the packaging of explosives | Register of manufactured explosives containing information on information marking | Kept by the manufacturer for at least 50 years |
| Transfer of part of a manufactured batch of explosives from Manufacturer No. 1 to Recipient No. 2 | Not carried out | Information marking certificate No. 1 for the batch of explosives. Register of explosives transferred by Manufacturer No. 1. Register of explosives received by Recipient No. 2 | The original certificate is transferred to Recipient No. 2; a copy is kept by the manufacturer for at least 50 years together with the register of transferred explosives |
| Destruction by Manufacturer No. 1 of a part of the manufactured batch of explosives that has become unusable | Not carried out | Information marking certificate No. 2 for the batch of explosives. Register of explosives received by Manufacturer No. 1 | The original certificate is transferred to the competent authority of the participating state; a copy is kept by the manufacturer for at least 50 years together with the register of received explosives |
2. Indicative List of Documents for Ammunition Bearing Information Markings
| Stages of circulation of ammunition | Information marking | Documents containing information on information marking | Place and retention period of documents |
|---|---|---|---|
| Manufacture and marking of a batch of ammunition | Introduction of information marking into ammunition | Register of manufactured and marked ammunition containing information on information marking | Kept by the manufacturer for at least 50 years |
| Transfer of part of a batch of ammunition from Manufacturer No. 1 to User No. 2 | Not carried out | Information marking certificate for the batch of ammunition. Register of ammunition transferred by Manufacturer No. 1. Register of ammunition received by User No. 2 | The original certificate is transferred to User No. 2; a copy is kept by Manufacturer No. 1 for at least 50 years together with the register of transferred ammunition |
| Use for its intended purpose of the entire batch of ammunition received by User No. 2 | Not carried out | Register of ammunition received by User No. 2 | The original certificate is transferred to the competent authority of the participating state; a copy is kept by the user for at least 50 years together with the register of received ammunition |
3. Indicative List of Documents for Firearms Bearing Information Markings
| Stages of circulation of firearms | Information marking | Documents containing information on information marking | Place and retention period of documents |
|---|---|---|---|
| Manufacture and marking of firearms | Introduction of information marking into firearms | Register of manufactured firearms containing information on information marking | Kept by the manufacturer for at least 50 years |
| Transfer of firearms from Manufacturer No. 1 to User No. 2 | Not carried out | Information marking certificate for firearms. Register of firearms transferred by Manufacturer No. 1. Register of firearms received by User No. 2 | The original certificate is transferred to User No. 2; a copy is kept by Manufacturer No. 1 for at least 50 years together with the register of transferred firearms |
| Transfer of firearms from User No. 2 to Manufacturer No. 3 for repair | Not carried out | Register of firearms transferred by User No. 2. Register of firearms received by Manufacturer No. 3 | The original certificate is transferred to Manufacturer No. 3; a copy is kept by User No. 2 for at least 50 years together with the register of received firearms |
Constitution Law Code Regulatory Act Decree Order Decision Resolution Advocate Almaty Lawyer Legal Services Legal Consultation Civil Criminal Administrative Cases and Disputes Defense Arbitration Legal Company of Kazakhstan Law Office Court Cases Declaration Decree Order Resolution Decision Report Conclusion Application Conclusion Convention Contract Memorandum Methodology Rules Note Regulations Program Charter Statute Charter Article Commentary Resolution Regulations Protocol Draft Program Rules Addresses