Safety and Labor Protection Instructions according to the Labor Code

Attention! The Law and Law Law Company draws your attention to the fact that this document is basic and does not always meet the requirements of a specific situation. Our lawyers are ready to assist you in drafting any legal document that suits your situation. For more information, please contact lawyer Kenesbek Islam by phone.; +7 (708) 971-78-58; +7 (727) 971-78-58.

 

"I CLAIM"

General Director of LLP "...."  

                             Sarzhanov G.T.    

   «____»__________20…. year    

manual

ON OCCUPATIONAL SAFETY AND HEALTH FOR THE CEO

General safety requirements

Persons who have completed their professional training are allowed to work independently as CEO.:

introductory briefing;

fire safety briefing;

initial on-the-job training;

electrical safety instruction at the workplace and verification of assimilation of its contents.

The CEO must pass:

repeated safety training at the workplace at least every six months;

unscheduled briefing: in case of changes in the technological process or labor protection regulations, replacement or modernization of production equipment, fixtures and tools, changes in working conditions and organization, violations of labor protection instructions, interruptions in work for more than 60 calendar days.

The General Director is obliged to:

observe the internal labor regulations established at the enterprise.;

follow the requirements of these instructions, instructions on fire safety measures, and instructions on electrical safety;

comply with the requirements for the operation of the equipment;

use it for its intended purpose and take care of the issued personal protective equipment.

The CEO must:

be able to provide first (pre-medical) assistance to the victim in case of an accident;

know the location of first aid facilities, primary fire extinguishing facilities, main and emergency exits, and escape routes in case of an accident or fire;

perform only the assigned work and do not transfer it to others without the permission of the management

be attentive during work, do not be distracted or distract others, and do not allow people who are not related to work to enter the workplace.;

keep the workplace clean and tidy.

The CEO must know and follow the rules of personal hygiene. Eat, smoke, and rest only in specially designated rooms and places.

If a fire is detected or in case of fire:

disable the hardware;

Inform the fire department and the administration;

start extinguishing the fire with the primary fire extinguishing equipment available in the workshop in accordance with the fire safety instructions.

In case of a threat to life, leave the premises.1.6. In case of an accident, provide first aid to the victim, immediately inform the director of the incident, and take measures to preserve the accident situation (equipment condition) if it does not pose a danger to others.1.7 The main dangerous and harmful production factors under certain circumstances may be:

racks, ladders, loads,

The Director General is responsible for non-compliance with the safety requirements set out in these instructions in accordance with the current legislation of the Republic of Kazakhstan.

 

2.1. Before starting work, every employee must:2.1.1. If necessary, ventilate the room, eliminate increased air mobility (drafts), etc.2.1.2. Inspect and tidy up the workplace.2.1.3. Adjust the illumination in the workplace and make sure that it is sufficient.2.1.4. Check the correct installation of the table and chair.2.1.5. Check the correct connection of the equipment to the network.2.1.6. Check the serviceability of the power supply wires and the absence of exposed wire sections.2.1.7. Turn on the power to the PC, following the sequence: network filter, monitor, peripherals, processor.2.2 An employee is not allowed to start work if a malfunction of the equipment is detected and wipe the electrical equipment that is under voltage with a wet cloth (the electric fork is plugged into an outlet).2.3 The employee is obliged to inform the head of the department about the detected malfunction of the equipment and start work after the elimination of malfunctions or malfunctions of the equipment. Safety and Labor Protection Instructions according to the Labor Code

 

3.1 Connect the PC and other equipment to the power supply network only with standard network cables and the presence of grounding.3.2. To carry out operational regulation of the course of production and other types of activities of the enterprise and its divisions in accordance with production programs, calendar plans.3.3 An employee is prohibited from working on a PC.:- Touch both the monitor screen and the keyboard at the same time.- touch the back panel of the system unit (processor) when the power is on.- switch the connectors of the interface cables of peripheral devices when the power is on.- perform independent opening and repair of equipment.3.4 The employee must disconnect the PC from the power supply:- when a malfunction is detected;- when the mains voltage is suddenly released;- during cleaning and cleaning of equipment.3.5 When working on copying and multiplying equipment:- work only with the lid closed, pressing the copied materials.;- in case of contact with toner on the skin, immediately wash it off with soap and water, in case of contact with eyes, immediately rinse eyes with plenty of water for 15 minutes and consult a doctor;- if irritation of the eyes, nasopharynx or redness of the skin occurs, it is necessary to stop copying.3.6 When working on copying and multiplying equipment, it is prohibited:- release jammed paper when the power is on;- turn off the equipment without waiting for its automatic shutdown; - perform self-opening and repair of the copying and multiplying device;- to put and place foreign objects on the copying and multiplying machine, to expose it to mechanical influences;- leave the copying and multiplying device unattended, connected to the power grid and running.

3.7 When using electrical appliances, it is not allowed:- leave electrical appliances turned on without supervision (except fax machine and refrigerator);- hit electrical appliances, pull the power cord to turn them off;- remove fences, repair equipment; - allow the cable to touch hot or warm objects;- place foreign objects on the network cable and twist it; - allow moisture to get on the surface of electrical appliances;- allow persons who are not authorized to work on the equipment to work on it.3.8 If an extraneous voltage is detected on the equipment, in all cases of power cord breakage, grounding malfunction and other damage, burning, smoke, immediately turn off the power and inform the supervisor about the emergency.Do not start work before troubleshooting.

3.9 When staying in the premises and on the territory of enterprises and organizations, the employee must:- familiarize yourself with the current safety regulations, traffic patterns on the territory and premises and comply with their requirements;- it is forbidden for an employee to walk along the staircases, holding on to the railing.:- stand and walk under the load being moved by a lifting mechanism, under scaffolding and ladders; - enter dangerous areas of production, operation of machinery, mechanisms, equipment, fences;- to walk unnecessarily around the territory and premises, to be distracted from work yourself and distract others;- open doors of electrical installations, open or remove protective covers, fences;3.10. During work, do not use techniques that speed up work by violating safety requirements.3.11 In case of interruption of the supply of fuel and electricity to production, contact the electrical networks by phone and find out the reason for the shutdown and the time of supply of voltage to production. Safety and Labor Protection Instructions according to the Labor Code

 

4.1 In case of accidents and situations that may lead to accidents and accidents, it is necessary:4.1.1 Immediately stop work and notify the immediate supervisor.4.1.2 Under the supervision of the supervisor, promptly take measures to eliminate the causes of accidents or situations that may lead to accidents or accidents.4.2 In case of fire, smoke:4.2.1 Immediately inform the fire department by phone "101", notify the employees, notify the head of the unit, and report the fire to the security post.4.2.2 Open emergency exits from the building, turn off the power supply, close the windows and close the doors.4.2.3 Start extinguishing the fire with primary fire extinguishing means, if it does not involve a risk to life.4.2.4 Arrange a meeting of the fire brigade.4.2.5 Leave the building and stay in the evacuation zone.

4.3 In case of an accident:4.3.1 Immediately arrange first aid for the victim and, if necessary, deliver him to a medical organization.4.3.2 Take urgent measures to prevent the development of an emergency or other emergency situation and the impact of traumatic factors on others.4.3.3 To preserve the situation as it was at the time of the accident before the start of the accident investigation, if this does not threaten the life and health of other persons and does not lead to a catastrophe, accident or other emergency circumstances, and if it is impossible to preserve it. – to fix the current situation (draw up diagrams, hold other events).

 

Attention!   

       Law and Law Law Law draws your attention to the fact that this document is basic and does not always meet the requirements of a particular situation. Our lawyers are ready to assist you in legal advice, drawing up any legal document suitable for your situation.  

 For more information,  please contact a Lawyer / Attorney by phone: +7 (708) 971-78-58; +7 (700) 978 5755, +7 (700) 978 5085. 

Attorney at Law Almaty Lawyer Legal Services Legal Advice Civil Criminal Administrative Cases Disputes Protection Arbitration Law Firm Kazakhstan Law Office  Court Cases