Section VII Group 39 of Note 1 of the Law on the Accession of the Republic of Kazakhstan to the International Convention on the Harmonized Commodity Description and Coding System and the Protocol on Amendments to the International Convention on the Harmonized Commodity Description and Coding System

Home / RLA / Section VII Group 39 of Note 1 of the Law on the Accession of the Republic of Kazakhstan to the International Convention on the Harmonized Commodity Description and Coding System and the Protocol on Amendments to the International Convention on the Harmonized Commodity Description and Coding System

Section VII Group 39 of Note 1 of the Law on the Accession of the Republic of Kazakhstan to the International Convention on the Harmonized Commodity Description and Coding System and the Protocol on Amendments to the International Convention on the Harmonized Commodity Description and Coding System

Section VII Plastics and products made from them; Rubber, rubber and products made from them

Notes: 1.- Products presented in sets consisting of two or more separate components, some or all of which are included in this section and are intended to be mixed in order to obtain a product included in Section VI or VII, must be included in the heading corresponding to this product, provided that these components(a) given their packaging method, they are clearly intended to be used together without repackaging; (b) they are supplied together; and (c) are determined by their nature or by their relations as complementary to each other. 2.- With the exception of goods of heading 39.18 or 39.19, plastics, rubber and articles made from them with printed patterns, drawings or images specially applied to them for their main purpose are included in Chapter 49.

Group 39 Plastics and articles made from them

Notes: 1.- Throughout the Nomenclature, the term "plastics" means materials of headings 39.01-39.14, which, during polymerization or at some subsequent stage, are capable of taking a given shape under the influence of external influences (usually temperature and pressure, and, if necessary, using a solvent or plasticizer) and retaining it after the external influence is eliminated. impact, such as pressing, casting, extrusion, calendering or other. Throughout the Nomenclature, the term "plastics" also means vulcanized fiber, but does not apply to materials considered as textiles in section XI. 2. This chapter does not include: (a) waxes of heading 27.12 or 34.04; (b) individual organic compounds of a certain chemical composition (Group 29); (c) heparin or its salts (heading 30.01); (d) solutions (other than collodions) consisting of any products of headings 39.01-39.13 in volatile organic solvents, provided that the mass of the solvent exceeds 50% of the mass of the solution (heading 32.08); foil for embossing heading 32.12; (e) organic surfactants or products of heading 34.02; (f) remelted resins or ester resins (heading 38.06); (g) diagnostic or laboratory reagents on a plastic substrate (heading 38.22; (h) synthetic rubber of Group 40 or articles made from it; (i) saddlery or harness (heading 42.01) or suitcases, valises, handbags and other articles of heading 42.02; (k) wicker, basketry or other articles of group 46; (l) wall coverings of heading 48.14;

Section VII, Group 39, Notes 2

(m) goods of section XI (textile materials and textile products); (h) products of section XII (for example, shoes, hats, umbrellas, sun umbrellas, canes, whips, whips or parts thereof); (o) costume jewelry of heading 71.17; (n) goods of section XVI (machinery and mechanical or electrical devices); (p) parts of aircraft or vehicles of Section XVII; (c) articles of Chapter 90 (for example, optical elements, eyeglass frames, drawing tools); (t) articles of Chapter 91 (for example, watch cases of all kinds); (y) articles of Chapter 92 (for example, musical instruments or parts thereof); (f) articles of Chapter 94 (for example, furniture, lamps and lighting equipment, light signage, prefabricated building structures); (x) articles of Chapter 95 (for example, toys, games, sports equipment); or (c) articles of Chapter 96 (for example, brushes, buttons, zippers, combs, mouthpieces or tube holders or similar articles, parts for thermoses or similar articles, pens, pencils with a plug-in lead). 3.- Headings 39.01-39.11 include only the following chemical synthesis products: (a) liquid synthetic polyolefins, less than 60 vol.% of which is distilled at 300 ° C and a pressure of 1013 mbar in the case of low-pressure distillation (headings 39.01 and 39.02); (b) resins with a low degree of polymerization of the coumarone-indene type (heading 39.11); (c) other synthetic polymers containing on average at least 5 monomeric units; (d) silicones (heading 39.10); (e) resoles (heading 39.09) and other prepolymers. 4.- The term "copolymers" means all polymers in which no monomeric unit is 95% by weight.% or more of the total polymer content. In this chapter, unless otherwise specified in the context, copolymers (including copolycondensates, additive copolymerization products, block copolymers and grafted copolymers) and polymer mixtures are included in the same heading as polymers of a comomeric unit that predominates by weight over any other individual comomeric unit. In this note, the comomeric units forming polymers falling into the same heading should be considered together. If no single comomeric link prevails, then copolymers or polymer mixtures, depending on the specific case, should be included in the heading, the last in ascending order of codes among the considered equivalent headings. 5.- Chemically modified polymers in which only the side chains of the main polymer chain are altered by chemical action are included in the heading corresponding to the unmodified polymer. This condition does not apply to grafted copolymers. 6.- For the purposes of headings 39.01 to 39.14, the term "primary forms" means only the following forms: (a) liquids and pastes, including dispersions (emulsions, suspensions) and solutions; (b) irregularly shaped blocks, lumps, powders (including press powders), granules, flakes and similar bulk forms. 7.- Heading 39.15 does not include waste, trimmings and scrap of homogeneous thermoplastic material recycled into the starting material (headings 39.01-39.14). 8.- In heading 39.17, the term "pipes, tubes and hoses" means hollow products or semi-finished products, or finished products commonly used for transportation, supply or distribution of gases or liquids (for example, a corrugated garden hose, perforated pipes). The term also means sausage casings and other flat-shaped pipes. However, with the exception of the latter, products having an internal cross-section of a shape other than a circle, oval, rectangle (in which the length is no more than 1.5 times the width) or a regular polygon are considered not as pipes, tubes and hoses, but as shaped profiles. 9.- For the purposes of heading 39.18, the term "plastic wall or ceiling coverings" means articles in rolls of at least 45 cm wide used for wall or ceiling decoration, consisting of plastics fixed on a substrate of any material other than paper; In this case, the plastic layer (on the front surface) is usually decorated by embossing, fluting, coloring, printing or otherwise.

Section VII Group 39 Notes 3

10.- In headings 39.20 and 39.21, the term "plates, sheets, film and strips or tapes" means only plates, sheets, film and strips or tapes (other than those included in Chapter 54), as well as blocks of regular geometric shape with or without a pattern, or with a surface treated in another way, whether or not they are cut into rectangles (including squares), but without further processing (even if they become finished products as a result of such operations). 11.- Heading 39.25 includes only the following products, which are not products included in the previous headings of subgroup II of this group: (a) tanks, tanks (including septic tanks), barrels and similar containers with a volume of more than 300 liters; (b) building elements used, for example, for floors walls or partitions, ceilings or roofs; (c) gutters and fittings thereto; (d) doors, windows and frames thereto and door sills; (e) balconies, balustrades, fences, gates and similar fences; (f) shutters, curtains (including Venetian blinds) and similar articles and parts and accessories thereto; (g) large-sized structural elements of racks for assembly and permanent installation, for example, in shops, workshops, warehouses; (h) decorative architectural details, for example, flutes, domes, dovecotes; and (i) fittings and fittings intended for stationary installation in/or on doors, windows, stairs, walls or other parts of buildings, for example, buttons, handles, hooks, staples, towel hooks, circuit breakers and other protective boards.

Notes to subheadings: 1.- In any heading of this chapter, polymers (including copolymers) and chemically modified polymers should be included in accordance with the following provisions: (a) if there is a subheading "other" at the same level: (1) in the subheading "polymers" the prefix "poly" (for example, polyethylene and polyamide-6,6) means that the main monomeric unit or monomeric units of the named polymer, taken together, should be 95% by weight.% or more of the total polymer content; (2) copolymers of subheadings 3901.30, 3903.20, 3903.30 and 3904.30 should be included in the same subheadings provided that the comomeric units of the above-mentioned copolymers are 95% by weight.% or more of the total polymer content; (3) chemically modified polymers should be included in the "other" subheading if the chemically modified polymers are not included in another, more specific, subheading.; (4) polymers not listed in paragraph 1, 2 or 3 above should be included in that subheading from among the remaining subheadings of the same level, which includes polymers of a monomeric unit prevailing by weight over all other individual monomeric units. For this purpose, the main monomeric units of polymers forming polymers falling into the same subheading should be considered together. Only those comomeric units included in the polymer that are included in subheadings of the same level should be compared.; (b) in the absence of a "other" subheading at the same level: (1) polymers should be included in a subheading that includes polymers of the monomeric unit that predominates by weight over all other individual monomeric units. For this purpose, the main monomeric units of polymers falling into the same subheading should be considered together. Only those comomeric units included in the polymer that are included in subheadings of the same level should be compared.; (2) Chemically modified polymers should be included in the subheading corresponding to the unmodified polymer. Polymer mixtures should be included in the same subheading as polymers of the same monomeric units in the same proportions. 2.- For the purposes of subheading 3920.43, the term "plasticizers" means secondary plasticizers.

Section VII Group 39 39.01/05 1

------------------------------------------------------------------- Commodity! HS code ! position ! ! ------------------------------------------------------------------- I. Primary forms

39.01 Ethylene polymers in primary forms: 3901.10 - polyethylene with a specific gravity of less than 0.94 3901.20 - polyethylene with a specific gravity of 0.94 or more 3901.30 - ethylene copolymers with vinyl acetate 3901.90 - other 39.02 Polymers of propylene or other olefins in primary forms: 3902.10 - polypropylene 3902.20 - polyisobutylene 3902.30 - copolymers of propylene 3902.90 - other 39.03 Styrene polymers in primary forms: - polystyrene: 3903.11 -- foamed 3903.19 -- other 3903.20 - styrene acrylonitrile (SAN) copolymers 3903.30 - acrylonitrile butadiene styrene (ABS) copolymers 3903.90 - other 39.04 Polymers of vinyl chloride or other halogenated olefins, in primary forms: 3904.10 - polyvinyl chloride, not mixed with other components - other polyvinyl chloride: 3904 21 -- non-plasticized 3404.22 -- plasticized 3904.30 - vinyl chloride and vinyl acetate copolymers 3404.40 - other vinyl chloride copolymers 3904.50 - vinylidene chloride polymers - fluoropolymers: 3904.61 -- polytetrafluoroethylene 3904.69 -- other 3904.90 - other 39.05 Polymers of vinyl acetate or other vinyl esters, in primary forms; other vinyl polymers in primary forms: - polyvinyl acetate: 3905.12 -- as aqueous dispersions 3905.19 -- other - vinyl acetate copolymers: 3905.21 -- as aqueous dispersions 3905.29 -- other -------------------------------------------------------------------

Section VII Group 39 39.05 2 /12 1

------------------------------------------------------------------- Commodity! HS code ! position ! ! ------------------------------------------------------------------- 3905.30 - polyvinyl alcohol, whether or not containing non-hydrolyzed acetate groups - other: 3905.91 -- copolymers 3905.99 -- other 39.06 Acrylic polymers in primary forms: 3906.10 - polymethylmethacrylate 3906.90 - other 39.07 Polyacetals, other simple polyesters and epoxy resins in primary forms; polycarbonates, alkyd resins, polyallyl esters and other polyesters in primary forms: 3907.10 - polyacetals 3907.20 - other simple polyesters 3907.30 - epoxy resins 3907.40 - polycarbonates 3907.50 - alkyd resins 3907.60 - polyethylene terephthalate - other complex polyesters: 3907.91 -- unsaturated 3907.99 -- other 39.08 Polyamides in primary forms: 3908.10 - polyamide-6, -11, -12, -6,6, -6,9, -6,10 or -6.12 3908.90 - other 39.09 Amino-aldehyde resins, phenol-aldehyde resins and polyurethanes in primary forms: 3909.10 - carbamide and thiocarbamide resins 3909.20 - melamine resins 3909.30 - amino-aldehyde resins other 3909.40 - phenol-aldehyde resins 3909.50 - polyurethanes 39.10 3910.00 Silicones in primary forms. 39.11 Petroleum resins, coumarone-indene resins, polyterpenes, polysulfides, polysulfones and other products specified in note 3 to this chapter, in primary forms, not elsewhere specified or included: 3911.10 - petroleum resins, coumarone, indene or coumarone-indene and polyterpenes 3911.90 - other 39.12 Cellulose and its chemical derivatives, in primary forms, not elsewhere specified or included: - cellulose acetates: 3912.11 -- non-plasticized -------------------------------------------------------------------

Section VII Group 39 39.12 2 /17 1

------------------------------------------------------------------- Commodity! HS code ! position ! ! ------------------------------------------------------------------- 3912.12 -- plasticized 3912.20 - cellulose nitrates (including collodions) - cellulose esters, simple: 3912.31 -- carboxymethylcellulose and its salts 3912.39 -- other 3912.90 - other 39.13 Natural polymers (for example, alginic acid) and modified natural polymers (for example, cured proteins, chemical derivatives of natural rubber), in primary forms, not elsewhere specified or included: 3913.10 - alginic acid, its salts and esters 3913.90 - other 39.14 3914.00 Ion-exchange resins obtained on the basis of polymers of headings 39.01-39.13, in primary forms.

II. Waste, scraps and scraps; semi-finished products; products

39.15 Waste, trimmings and scrap, from plastics: 3915.10 - ethylene polymers 3915.20 - styrene polymers 3915.30 - vinyl chloride polymers 3915.90 - other plastics 39.16 Monofilament with a cross-sectional size of more than 1 mm, rods, rods and shaped profiles, with a treated or untreated surface, but not otherwise treated, of plastics: 3916.10 - of ethylene polymers 3916.20 - of vinyl chloride polymers 3916.90 - of other plastics 39.17 Pipes, tubes and hoses and their fittings (for example, joints, elbows, flanges), of plastics: 3917.10 - artificial shells (for sausage products) of cured proteins or cellulosic materials - pipes, tubes and hoses, rigid: 3917.21 -- of ethylene polymers 3917.22 -- from PROPYLENE POLYMERS 3917.23 -- of vinyl chloride polymers 3917.29 -- of other plastics - pipes, tubes and hoses, other: 3917.31 -- pipes, tubes and hoses, flexible, withstanding pressures up to 27.6 mpa 3917.32 -- other, not reinforced or combined with other materials, without fittings -------------------------------------------------------------------

Section VII Group 39 39.17 2 /20 1

------------------------------------------------------------------- Commodity! HS code ! position ! ! ------------------------------------------------------------------- 3917.33 -- other, not reinforced or combined with other materials, with fittings 3917.39 -- other 3917.40 - fittings 39.18 Floor coverings made of plastics, self-adhesive or non-self-adhesive, in rolls or plates; coatings for walls or ceilings of plastics specified in note 9 to this chapter: 3918.10 - of vinyl chloride polymers 3918.90 - of other plastics 39.19 Plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, self-adhesive, in rolls or not in rolls: 3919.10 - in rolls not exceeding 20 cm wide 3919.90 - other 39.20 Plates, sheets, film and strips or tapes, other, of plastics, non-porous and non-reinforced, non-cellular, without a substrate and not similarly bonded to other materials: 3920.10 - of ethylene polymers 3920.20 - of propylene polymers 3920.30 - of styrene polymers - of vinyl chloride polymers: 3920.43 -- containing at least 6 by weight.% of plasticizers 3920.49 -- other - from acrylic polymers: 3920.51 -- from polymethylmethacrylate 3920.59 -- other - from polycarbonates, alkyd resins, polyallyl esters or other polyesters: 3920.61 -- from polycarbonates 3920.62 -- from polyethylene terephthalate 3920 63 -- from unsaturated polyesters 3920.69 -- from other polyesters - of cellulose or its chemical derivatives: 3920 71 -- of regenerated cellulose 3920.72 -- of vulcanized fiber 3920.73 -- of cellulose acetate 3920.79 -- of other cellulose derivatives -- of other plastics: 3920.91 -- of polyvinyl butyral 3920.92 -- of polyamides -------------------------------------------------------------------

Section VII Group 39 39.20 2 /25

------------------------------------------------------------------- Commodity! HS code ! position ! ! ------------------------------------------------------------------- 3920.93 -- of amino-aldehyde resins 3920.94 -- of phenol-aldehyde resins 3920.99 -- of other plastics 39.21 Plates, sheets, film and strips or tapes of plastics, other: - porous: 3921.11 -- of styrene polymers 3921.12 -- of vinyl chloride polymers 3921.13 -- of polyurethanes 3921.14 -- of regenerated cellulose 3921.19 -- of other plastics 3921.90 - other 39.22 Bathtubs, showers, sinks for draining water, sinks for washing, bidets, toilets, seats and covers for them, drain tanks and similar sanitary products, of plastics: 3922.10 - bathtubs, showers, sinks for draining water and sinks for washing 3922.20 - seats and covers for toilets 3922.90 - other 39.23 Products for transportation or packaging of goods, made of plastics; stoppers, lids, caps and other sealing products, of plastics: 3923.10 - boxes, crates, baskets and similar products - bags and pouches (including conical ones): 3923.21 -- of ethylene polymers 3923.29 -- of other plastics 3923.30 - bottles, bottles, vials and similar articles 3923.40 - coils, bobbins, bobbins and similar articles 3923.50 - stoppers, caps, caps and other products for sealing 3923.90 - other 39.24 Dinnerware, kitchen utensils, other household items and toilet articles, made of plastics: 3924.10 - dinnerware and kitchen utensils 3924.90 - other 39.25 Plastic construction parts, not elsewhere specified or included: 3925.10 - tanks, cisterns, tanks and similar containers with a volume exceeding 300 liters 3925.20 - doors and thresholds for them, windows and their frames 3925.30 - shutters, blinds (including Venetian blinds) and similar articles and parts thereof 3925.90 - other -------------------------------------------------------------------

Section VII Group 39 39.26

------------------------------------------------------------------- Commodity! HS code ! position ! ! ------------------------------------------------------------------- 39.26 Other articles of plastics and articles of other materials of headings 39.01-39.14: 3926.10 - stationery or school supplies 3926.20 - clothing and clothing accessories (including gloves, mittens and mittens) 3926.30 - fasteners and fittings for furniture, vehicles or similar articles 3926.40 - statuettes and other decorative articles 3926.90 - other -------------------------------------------------------------------

Section VII Group 40 Notes

Group 40 Rubber, rubber and articles thereof

Notes: 1.- Unless otherwise specified in the context, the term "rubber and rubber" throughout the Nomenclature means the following products, vulcanized or non-vulcanized, solid or non-solid: natural rubber, balata, gutta-percha, guaiula, chicle and similar natural resins, synthetic rubber, factis obtained from oils, and these the same materials are in a regenerated form. 2.- This chapter does not include: (a) goods of section XI (textile materials and textile products); (b) footwear or parts thereof of Chapter 64; (c) headgear or parts thereof (including bathing caps) of Chapter 65; (d) mechanical or electrical devices or parts thereof of section XVI (including electrical goods of all kinds), of hard rubber or ebonite; (e) articles of Chapter 90, 92, 94 or 96; or (f) articles groups 95 (except sports gloves, mittens, mittens and articles of headings 40.11-40.13). 3.- For the purposes of headings 40.01 to 40.03 and 40.05, the term "primary forms" means the following forms: (a) liquids and pastes (including sub-vulcanized or non-vulcanized latex and other dispersions and solutions); (b) irregularly shaped blocks, lumps, bales, powders, granules, crumbs and similar bulk forms. 4.- In note 1 to this chapter and in heading 40.02, the term "synthetic rubber" means: (a) unsaturated synthetic substances that are irreversibly transformed by vulcanization of sulfur into non-thermoplastic substances that do not break at a temperature of 18-29 ° C when stretched 3 times their original length, and when stretched 2 times within 5 minutes, they return to a length exceeding the original length by no more than one and a half times. In this test, it is allowed to add substances necessary for the formation of cross-links, in particular, activators or accelerators of vulcanization. The substances listed in note 5b (ii and iii) are also allowed. However, the presence of any substances not intended to form cross-links, such as diluents, plasticizers and fillers, is not allowed; (b) thioplasts (HMS); and (c) natural rubber modified by grafting or by mixing with plastics, depolymerized natural rubber, mixtures of unsaturated synthetic substances with saturated synthetic high-molecular polymers, provided that all of the above products comply with the requirements specified above in paragraph 4a of this note regarding vulcanization, elongation and dimensional restoration. 5.- (a) Headings 40.01 and 40.02 do not include rubber or mixtures of rubbers if, before or after coagulation, they have been mixed with: (i) vulcanizing agents, accelerators, retardants or activators (other than those added to prepare vulcanized rubber latex); (ii) pigments or other coloring agents, other than those used only for identification purposes; (iii) plasticizers or fillers (other than mineral oil in the case of oil-filled rubber), reinforcing agents, organic solvents or any other substances other than those mentioned in paragraph 5b. (b) The presence of the following substances in rubber or a mixture of rubbers will not affect their assignment to heading 40.01 or 40.02, provided that such rubber or a mixture of rubbers retains its basic properties as a raw material: (i) emulsifiers or anti-adhesives; (ii) small amounts of emulsifier decomposition products; (iii) very small amounts of heat-sensitive agents (mainly for the production of heat-sensitive rubber latexes), cationic surfactants (usually for the production of electropositive rubber latexes), antioxidants, coagulants, agents that promote the conversion of rubber into crumbs, agents providing frost resistance, peptizers, anticoagulants, stabilizers, agents regulating viscosity, or similar special purpose additives.

Section VII Group 40 40.01/02 1

6.- For the purposes of heading 40.04, the term "waste, trimmings and scraps" means waste, trimmings and scraps generated during the manufacture or processing of rubber and articles made from it, which are completely unusable as such due to cuts, wear or other reasons. 7.- Filaments consisting entirely of vulcanized rubber with a cross-sectional dimension of more than 5 mm are included as strips or strips, rods or shaped profiles in heading 40.08. 8. Heading 40.10 includes conveyor belts, drive belts or belting made of fabric impregnated, coated or duplicated with rubber, or of fabric made of textile yarn or cord impregnated or coated with rubber. 9.- For the purposes of headings 40.01, 40.02, 40.03, 40.05 and 40.08, the terms "plates", "sheets" and "strips or strips" mean only plates, sheets and strips or strips and blocks of regular geometric shape, uncut or cut into rectangular (including square) shapes, whether or not finished articles with an embossed or non-embossed or otherwise treated surface, except for materials cut into pieces of a different shape or subjected to further processing. For the purposes of heading 40.08, the terms "rods" and "shaped profiles" mean only products, whether or not cut to length with a treated or untreated surface, but without further processing.

------------------------------------------------------------------- Commodity! HS code ! position ! ! ------------------------------------------------------------------- 40.01 Natural rubber, balata, gutta-percha, guajula, chicle and similar natural resins, in primary forms or in the form of plates, sheets or strips, or tapes: 4001.10 - natural rubber latex, whether or not vulcanized - natural rubber in other forms: 4001.21 -- smoked sheets (brand of natural rubber) 4001.22 -- natural, technically specified rubber (TSNR) 4001.29 -- other 4001.30 - balata, gutta-percha, guayula, chicle and similar natural resins 40.02 Synthetic and factice rubber obtained from oils, in primary forms or in the form of plates, sheets or strips, or tapes; mixtures of any product of heading 40.01 with any product of this heading, in primary forms or in the form of plates, sheets or strips, or tapes: - styrene butadiene rubber (SBR); Carboxylated styrene butadiene rubber (XSBR): 4002.11 -- latex 4002.19 -- other 4002.20 - butadiene rubber (BR) - isobutylene isoprene rubber (butyl rubber) (IIR): halogenated isobutylene isoprene rubber (CIIR or BIIR): 4002.31 -- isobutylene isoprene rubber(butyl rubber)(IIR) 4002.39 -- other - chloroprene rubber (chlorobutadiene) (CR): 4002.41 -- latex 4002.49 -- other -------------------------------------------------------------------

Section VII Group 40 40.02 2 /09 1

------------------------------------------------------------------- Commodity! HS code ! position ! ! ------------------------------------------------------------------- - nitrile butadiene rubber (NBR): 4002.51 -- latex 4002.59 -- other 4002.60 - isoprene rubber (IR) 4002.70 - non-conjugated ethylene propylene diene rubber (EPDM); 4002.80 - mixtures of any product of heading 40.01 with any product of this heading - other: 4002.91 -- latex 4002.99 -- other 40.03 4003.00 Regenerated rubber in primary forms or in the form of plates, sheets or strips, or tapes. 40.04 4004.00 Waste, scraps and scrap rubber (other than hard rubber), powders and granules, received from them. 40.05 Non-vulcanized rubber compound, in primary forms or in the form of plates, sheets or strips, or tapes: 4005.10 - rubber compound filled with technical carbon or silicon dioxide 4005.20 - solutions; other dispersions, other than those specified in subheading 4005.10 - other: 4005.91 -- plates, sheets and strips or tapes 4005.99 -- other 40.06 Other shapes (for example, rods, pipes and shaped profiles) and products (for example, discs and rings) made of non-vulcanized rubber: 4006.10 - tread blanks for tire repair 4006.90 - other 40.07 4007.00 Vulcanized rubber threads and cords. 40.08 Plates, sheets, strips or tapes, rods and shaped profiles of vulcanized rubber, other than hard rubber: - of porous rubber: 4008.11 -- plates, sheets and strips or tapes 4008.19 -- other - of non-porous rubber: 4008.21 -- plates, sheets and strips or tapes 4008.29 -- other 40.09 Pipes, tubes and hoses of vulcanized rubber, other than hard rubber, without fittings or with fittings (for example, joints, nozzles, flanges): - not reinforced or otherwise combined with other materials: 4009.11 -- without fittings 4009.12 -- with fittings -------------------------------------------------------------------

Section VII Group 40 40.09 2 /11 1

------------------------------------------------------------------- Commodity! HS code ! position ! ! ------------------------------------------------------------------- - reinforced or otherwise combined with metal only: 4009.21 -- without fittings 4009.22 -- with fittings - reinforced or otherwise combined with textile materials only: 4009.31 -- without fittings 4009.32 -- with fittings - reinforced or otherwise combined with other materials: 4009.41 -- without fittings 4009.42 -- with fittings 40.10 Conveyor belts or drive belts, or belting, of vulcanized rubber: - conveyor belts or belting: 4010.11 -- reinforced only with metal 4010.12 -- reinforced only with textile materials 4010.13 -- reinforced only with plastics 4010.19 -- other - belts or belting, drive belts: 4010.31 -- endless drive belts of trapezoidal cross-section (V-belts), ribbed, with an outer circumference of more than 60 cm, but not more than 180 cm 4010.32 -- endless drive belts of trapezoidal cross-section (V-belts), except ribbed, with an outer circumference of more than 60 cm but not more than 180 cm 4010.33 -- endless drive belts of trapezoidal cross-section (V-belts), ribbed, with an outer circumference of more than 180 cm but not more than 240 cm 4010.34 -- endless drive belts of trapezoidal cross-section (V-belts), except ribbed, with an outer circumference of more than 180 cm but not more than 240 cm 4010.35 -- endless toothed drive belts with an outer circumference of more than 60 cm but not more than 150 cm 4010.36 -- endless toothed drive belts, with an outer circumference of more than 150 cm, but not more than 198 cm 4010.39 -- other 40.11 New pneumatic rubber tires and tires: 4011.10 - for passenger cars (including cargo and passenger vans and sports cars) 4011.20 - for buses or motor vehicles for cargo transportation 4011.30 - for use in aviation 4011.40 - for motorcycles 4011.50 - for bicycles - other, with herringbone tread pattern or similar tread patterns: -------------------------------------------------------------------

Section VII Group 40 40.11 2 /15 1

------------------------------------------------------------------- Commodity! HS code ! position ! ! ------------------------------------------------------------------- 4011.61 -- for vehicles used in agriculture and forestry 4011.62 -- for vehicles and machines used in construction or industry and having a landing diameter of not more than 61 cm 4011.63 -- for vehicles and machines used in construction or industry and having a landing diameter of more than 61 cm 4011.69 -- other - other: 4011.92 -- for vehicles used in agriculture and forestry 4011.93 -- for vehicles used in construction or industry and having a landing diameter of not more than 61 cm 4011.94 -- for vehicles used in construction or industry and having a landing diameter of more than 61 cm 4011.99 - other 40.12 Tires and pneumatic rubber tires, refurbished or used; tires and tires, solid or semi-pneumatic, tire protectors and rim bands, rubber: - tires and tires, refurbished: 4012.11 -- for passenger cars (including cargo and passenger vans and sports cars) 4012.12 -- for buses or motor vehicles for cargo transportation 4012.13 -- for aviation use 4012.19 -- other 4012.20 - pneumatic tires and tires, used 4012.90 - other 40.13 Rubber chambers: 4013.10 - for passenger cars (including cargo and passenger vans and sports cars), buses or motor vehicles for cargo transportation 4013.20 - for bicycles 4013.90 - other 40.14 Hygienic or pharmaceutical products (including nipples) of vulcanized rubber, other than hard rubber, with or without hard rubber fittings: 4014.10 - contraceptives 4014.90 - other 40.15 Clothing and clothing accessories (including gloves, mittens and mittens) made of vulcanized rubber, other than hard rubber, for various purposes: -------------------------------------------------------------------

Section VII Group 40 40.15 2 /17

------------------------------------------------------------------- Commodity! HS code ! position ! ! ------------------------------------------------------------------- - gloves, mittens and mittens: 4015.11 -- surgical 4015.19 -- other 4015.90 - other 40.16 Articles of vulcanized rubber, other than hard rubber: 4016.10 - of porous rubber - other: 4016.91 -- floor coverings and mats 4016.92 -- rubber bands 4016.93 -- gaskets, washers and other seals 4016.94 -- boat or mooring shock absorbers, inflatable or non-inflated 4016.95 -- other inflatable products 4016.99 -- other 40.17 4017.00 Hard rubber (for example, ebonite) in all forms, including waste and scrap; products made of hard rubber. -------------------------------------------------------------------

Law of the Republic of Kazakhstan dated February 3, 2004 No. 525

The Republic of Kazakhstan should accede to the International Convention on the Harmonized Commodity Description and Coding System, signed in Brussels on June 14, 1983, and the Protocol amending the International Convention on the Harmonized Commodity Description and Coding System, signed in Brussels on June 24, 1986.

President

Republic of Kazakhstan

Constitution Law Code Standard Decree Order Decision Resolution Lawyer Almaty Lawyer Legal service Legal advice Civil Criminal Administrative cases Disputes Defense Arbitration Law Company Kazakhstan Law Firm Court Cases