Section XVI    Notes of the Law on the Accession of the Republic of Kazakhstan to the International Convention on the Harmonized Commodity Description and Coding System and the Protocol on Amendments to the International Convention on the Harmonized Commodity Description and Coding System  

        Section XVI   Machinery, equipment and mechanisms;   Electrical equipment; parts thereof;   Sound recording and sound reproducing equipment, equipment for recording and reproducing television images and sound, their parts and accessories  

     Notes: 1.- This section does not include: (a) conveyor belts or drive belts or belting made of plastics of Chapter 39 or of vulcanized rubber (heading 40.10); devices or other articles used in machinery or mechanical or electrical devices or for other technical purposes, made of vulcanized rubber, except hard rubber (heading 40.16);         (b) articles of natural leather or composite leather (heading 42.04) or of fur (heading 43.03) used in machinery or mechanical devices or for technical purposes; (c) bobbins, coils, spools, cones, cores, sleeves or similar carriers of any materials (for example, chapter 39, 40, 44 or 48 or section XV); (d) punched cards for jacquard or similar machines (for example, group 39 or 48 or section XV);         (e) conveyor belts or drive belts made of textile materials (heading 59.10) or other textile products for technical purposes (heading 59.11); (f) precious or semi-precious stones (natural, artificial or reconstructed) of headings 71.02-71.04 or articles made entirely of the aforementioned stones of heading 71.16, except for loose machined sapphires and diamonds for pickup needles (heading 85.22);         (g) general purpose parts described in note 2 to section XV, of base metal (section XV) or similar articles of plastics (Chapter 39); (h) drill pipes (heading 73.04); (i) endless strips of metal wire or strips (section XV); (k) articles of Chapter 82 or 83; (l) articles of Section XVII; (m) articles of Chapter 90; (h) watches of all kinds or other articles of Chapter 91; (o) interchangeable working tools of heading 82.07 or brushes that are machine parts (heading 96.03); similar interchangeable tools classified according to the material of which their working part is made (for example, in Chapter 40, 42, 43, 45 or 59 or in heading 68.04 or 69.09); (p) articles of Chapter 95; or (p) typewriter tapes or similar tapes in coils or in or without cassettes (classified according to the material from which they are made, or in heading 96.12 if they are soaked in ink or otherwise processed to produce prints).         2.- Subject to the provisions of Note 1 to this section, Note 1 to Chapter 84 and Note 1 to Chapter 85, machine parts (other than parts of articles of heading 84.84, 85.44, 85.45, 85.46 or 85.47) must be classified according to the following rules: (a) Parts that are goods included in any of the commodity items of groups 84 and 85 (other than commodity items 84.09, 84.31, 84.48, 84.66, 84.73, 84.85, 85.03, 85.22, 85.29, 85.38 and 85.48), in all cases should be classified in the commodity items provided for them.         (b) Other parts intended for use exclusively or primarily with one type of machine or with a number of machines of the same heading (including machines of heading 84.79 or 85.43) should be classified together with these machines or in the heading 84.09, 84.31, 84.48, 84.66, 84.73, 85.03, 85.22, 85.29 or 85.38, respectively. However, parts that are equally suitable for use primarily with goods of headings 85.17 and 85.25 to 85.28 are classified in heading 85.17.         (c) All other parts are classified in the heading 84.09, 84.31, 84.48, 84.66, 84.73, 85.03, 85.22, 85.29 or 85.38, respectively, or, in addition, in heading 84.85 or 85.48.  

     Section XVI Group 84 of Notes 1    

     3.- Combined machines consisting of two or more machines joined together to form a single whole, and other machines designed to perform two or more complementary or unrelated functions, should be classified as consisting only of that component or being the machine that performs the main function, unless in the context of otherwise agreed.         4.- If a machine (including a combination of machines) consists of separate components (regardless of whether they are located separately or connected by pipelines, transmission devices, electrical cables or other devices) designed to jointly perform a clearly defined function covered by one of the headings of Chapter 84 or 85, it is classified in the heading corresponding to this specific function.         5.- For the purposes of these notes, the term "machine" means any machine, equipment, mechanism, assembly, installation, apparatus or device included in headings of Chapters 84 or 85.  

        Group 84 Nuclear reactors, boilers, equipment and mechanical devices; parts thereof  

     Notes: 1.- This chapter does not include: (a) millstones, grindstones or other articles of Chapter 68; (b) equipment or devices (e.g. pumps) made of ceramic materials and ceramic parts of machines or devices made of any material (Chapter 69); (c) laboratory glassware (commodity heading 70.17); equipment, devices or other articles for technical purposes or parts thereof made of glass (heading 70.19 or 70.20);         (d) articles included in heading 73.21 or 73.22, or similar articles made of other base metals (chapters 74-76 or 78-81); (e) electromechanical household machines of heading 85.09; digital cameras of heading 85.25; or (f) manual mechanical floor cleaning brushes, without motor (heading 96.03).         2.- Subject to the provisions of note 3 to section XVI, machines or devices that meet the description in one or more headings 84.01 to 84.24 and at the same time the description in one or more headings 84.25 to 84.80 are included in the corresponding headings of the first mentioned group of headings, and not the second.         However, heading 84.19 does not include: (a) seed germination equipment, incubators or brooders (heading 84.36); (b) machines for moistening grain (heading 84.37);         (c) diffusion apparatus for extracting sugar-containing juice (heading 84.38); (d) equipment for heat treatment of textile yarns, fabrics or finished textiles (heading 84.51); or (e) equipment or units for mechanical processing in which temperature change, even if necessary, is an auxiliary process.         Heading 84.22 does not include: (a) sewing machines for sewing bags or similar containers (heading 84.52); or (b) office equipment of heading 84.72.         Heading 84.24 does not include: inkblasting printing presses (heading 84.43 or 84.71). 3.- A machine for processing any material that meets the description of heading 84.56 and at the same time the description of heading 84.57-84.61, 84.64 or 84.65 is included in heading 84.56.  

     Section XVI Group 84 of Notes 2    

4.- Heading 84.57 includes only metalworking machines other than lathes (including multi-purpose lathes) that can perform various types of machining operations by either: (a) automatically replacing tools from a tool shop or similar device in accordance with a processing program (machining centers); (b) automatically applications of different machining heads working simultaneously or sequentially with a fixed workpiece (single-position aggregate machines); or (c) automatic movement of the workpiece to various machining heads (multi-position aggregate machines).         5.- (A) For the purposes of heading 84.71, the term "computing machines" means: (a) digital machines capable of: (1) storing a program or processing programs and at least the information necessary to execute the program; (2) being freely reprogrammable in accordance with user requirements; (3) performing user-defined arithmetic calculations; and (4) execute, without human intervention, a processing program that requires the computer to change actions by making logical decisions during processing; (b) analog machines capable of simulating mathematical models and including at least analog elements, controls and programming elements; (c) analog-digital hybrid machines, consisting of a digital machine with analog elements or an analog machine with digital elements.         (B) Computing machines can be made in the form of systems consisting of a different number of separate units. Subject to the provisions set out in note 5D below, a block should be considered as part of a complete system if it meets all of the following conditions: (a) is exclusively or primarily used in a computing system; (b) has the ability to connect to the central data processing unit either directly or through one or more other blocks; and (c) is capable of receiving or presenting information in a form (codes or signals) that can be used by the system.         (C) Separately presented computer blocks are included in heading 84.71. (D) Printers, keyboards, X-Y coordinate input devices and data storage units on disks that meet the conditions set out above in notes 5B(b) and 5B(c), in all cases should be considered as commodity blocks. positions 84.71.         (E) Machines that perform specific functions other than information processing and contain or work in conjunction with computing machines are included in product lines in accordance with their specific functions or, if this is not possible, in residual product lines ("Other").         6.- Heading 84.82, inter alia, includes polished steel balls, the maximum and minimum diameter of which does not differ from the nominal diameter by more than 1% or more than 0.05 mm, whichever is smaller. Other steel balls are included in heading 73.26.7.- A machine that is used for more than one purpose should be classified as if its primary purpose were the only one.         Subject to the provisions of note 2 to this chapter and note 3 to section XVI, a machine whose primary purpose is not described in any heading, or a machine in which none of its primary purposes is, is classified in heading 84.79, unless otherwise specified in the context. Heading 84.79 also includes machines for making ropes or cables (for example, machines for twisting) from metal wire, textile yarn or other materials, or from a combination of such materials.         8.- For the purposes of heading 84.70, the term "handheld" applies only to devices whose dimensions do not exceed 170 x 100 x 45 mm.  

     Notes to subheadings: 1.- For the purposes of subheading 8471.49, the term "systems" means computing machines whose units satisfy the requirements set out in note 5B to chapter 84 and which include at least a central data processing unit, one input unit (for example, a keyboard or scanner) and one output unit (for example, display or printer).  

   Section XVI Group 84 84.01/06 1    

     2.- Subheading 8482.40 includes only bearings with cylindrical rollers, the diameter of which does not exceed 5 mm, and their length is at least three diameters.   The ends of the rollers can be rounded.       ------------------------------------------------------------------- Commodity!  HS code !   position !          !   ------------------------------------------------------------------- 84.01 Nuclear reactors; fuel elements (fuel rods), not irradiated for nuclear reactors; isotope separation equipment and devices: 8401.10 - nuclear reactors 8401.20 - isotope separation equipment and devices, parts thereof 8401.30 - fuel elements (fuel rods), not irradiated 8401.40 - parts of nuclear reactors 84.02             Steam boilers or other steam-producing boilers (except central heating water boilers, which can also produce low-pressure steam); water boilers with a superheater: - steam boilers or other steam-producing boilers: 8402.11 -- water-tube boilers with a capacity of more than 45 tons of steam per hour 8402.12 -- water-tube boilers with a capacity of not more than 45 tons of steam per hour 8402.19 -- other steam-producing boilers, including combined 8402.20 -- boilers with a superheater 8402.90  - parts 84.03             Neutral heating boilers, other than boilers of heading 84.02: 8403.10 - boilers 8403.90 - parts 84.04             Auxiliary equipment for use with boilers of heading 84.02 or 84.03 (for example, economizers, superheaters, soot extractors, gas recuperators); condensers for steam or other steam power plants: 8404.10 - auxiliary equipment for use with boilers of heading 84.02 or 84.03 8404.20 - condensers for steam or other steam power plants 8404.90 - parts 84.05 Gas generators or water gas generators with or without purification plants;                    acetylene gas generators and similar gas generators with or without purification plants: 8405.10 - gas generators or water gas generators with or without purification plants;                         acetylene gas generators and similar gas generators with or without purification plants 8405.90 - parts 84.06 Steam turbines and other steam turbines: 8406.10 - turbines for marine power plants   --------------------------------------------------------------------  

     Section XVI Group 84 84.06 2 /11 1    

------------------------------------------------------------------- Commodity!  HS code !   position !          !   ------------------------------------------------------------------ Other turbines: 8406.81 -- with a capacity exceeding 40 MW 8406.82 -- with a capacity not exceeding 40 MW 8406.90 - parts 84.07 Internal combustion engines with spark ignition, with rotating or reciprocating piston movement: 8407.10 - aircraft engines - engines for marine power plants: 8407.21 -- outboard 8407.29  -- other - reciprocating piston engines used to propel vehicles of group 87: 8407.31 -- with an engine cylinder capacity of not more than 50 cm 3 8407.32 -- with an engine cylinder capacity of more than 50 cm 3 but not more than 250 cm 3 8407.33 -- with an engine cylinder capacity of more than 250 cm 3 , but not more than 1000 cm 3 8407.34  -- with an engine cylinder capacity exceeding 1000 cm3 8407.90 - other engines 84.08 Compression-ignition reciprocating internal combustion engines (diesels or semi-diesels):              8408.10 - marine propulsion engines 8408.20 - engines used to propel vehicles of group 87 8408.90  - 84.09 Other engines, parts intended exclusively or mainly for engines of heading 84.07 or 84.08: 8409.10 - for aircraft engines - other: 8409.91 -- intended exclusively or mainly for reciprocating internal combustion engines with spark ignition 8409.99 -- other 84.10 Hydraulic turbines, water wheels and regulators thereto:                       - hydraulic turbines and water wheels: 8410.11 -- with a capacity of not more than 1,000 kW 8410.12 -- with a capacity of more than 1,000 kW but not more than 10,000 kW 8410.13 -- with a capacity of more than 10,000 kW 8410.90 - parts, including regulators 84.11 turbojet and turboprop engines, other gas turbines: - turbojet engines: 8411.11 -- with a thrust of not more than 25 kN   --------------------------------------------------------------------  

     Section XVI Group 84 84.11 2 /13    

------------------------------------------------------------------- Commodity!  HS code !   position !          !   ------------------------------------------------------------------- 8411.12 -- with a thrust of more than 25 kN - turboprop engines: 8411.21 -- with a capacity of not more than 1100 kW 8411.22 -- with a capacity of more than 1100 kW - other gas turbines: 8411.81 -- with a capacity of not more than 5000 kW 8411.82 -- with a capacity of more than 5000 kW - parts: 8411.91 -- turbojet and turboprop engines 8411.99  -- other 84.12 Engines and power plants other: 8412.10 - jet engines, except turbojets - hydraulic power plants and engines: 8412.21 -- linear acting (cylinders) 8412.29 -- other - pneumatic power plants and engines: 8412.31 -- linear acting (cylinders) 8412.39 -- other 8412.80 - other 8412.90 - parts 84.13             Liquid pumps with or without flow meters; liquid lifts: - pumps having flow meters or providing for their installation: 8413.11 -- pumps for fuels and lubricants used at gas stations and garages 8413.19 -- other 8413.20 - manual pumps, other than pumps of subheading 8413.11 or 8413.19 8413.30  - fuel, oil or coolant pumps for internal combustion engines 8413.40 - concrete pumps 8413.50 - other volumetric reciprocating pumps 8413.60 - other volumetric rotary pumps 8413.70 - other centrifugal pumps - other pumps; liquid lifts: 8413.81 -- pumps 8413.82 -- liquid lifts - parts: 8413.91 -- pumps 8413.92 -- liquid lifts   --------------------------------------------------------------------  

     Section XVI Group 84 84.14/17 1    

------------------------------------------------------------------- Commodity!  HS code !   position !          !   -------------------------------------------------------------------  84.14             Air or vacuum pumps, air or gas compressors and fans;                    ventilation or recirculating exhaust hoods or cabinets with a fan, with or without filters: 8414.10 - vacuum pumps 8414.20 - manual or foot-operated pneumatic pumps 8414.30 - compressors used in refrigeration equipment 8414.40 - air compressors on wheeled chassis, towed - fans: 8414.51  -- desktop, wall, floor, ceiling, for roofs or windows with a built-in electric motor with a power of not more than 125 watts 8414.59 -- other 8414.60 - hoods or exhaust cabinets, the largest horizontal size of which is not more than 120 cm 8414.80 - other 8414.90  - parts 84.15             Air conditioning units equipped with a fan with a motor and devices for changing the temperature and humidity of the air, including air conditioners in which humidity cannot be regulated separately: 8415.10 - window or wall type, in a single housing or "split system" 8415.20 - used for people in motor vehicles                       - other: 8415.81 -- with integrated refrigeration unit and valve for switching the cooling/heating cycle (reversible heat pumps)              8415.82 -- other with integrated refrigeration unit 8415.83 -- without integrated refrigeration unit 8415.90 - parts 84.16 Combustion burners for liquid fuel, atomized solid fuel or for gas;                    mechanical furnaces, including their mechanical grates, mechanical ash removers and similar devices: 8416.10 - furnace burners for liquid fuel 8416.20 - other furnace burners, including combined 8416.30 - mechanical furnaces, including their mechanical grates, mechanical ash removers and similar devices 8416.90  - parts 84.17 Industrial or laboratory furnaces and furnaces, including incinerating furnaces, non-electric: 8417.10 - furnaces and furnaces for roasting, melting or other heat treatment of ores, pyrite ores or metals 8417.20 - baking furnaces, including confectionery furnaces   --------------------------------------------------------------------  

     Section XVI Group 84 84.17 2 /19 1    

------------------------------------------------------------------- Commodity!  HS code !   position !          !   ------------------------------------------------------------------- 8417.80 - other 8417.90 - parts 84.18 Refrigerators, freezers and other refrigerating or freezing equipment, electric or other types; heat pumps, other than air conditioning units of heading 84.15: 8418.10 - combined refrigerators-freezers with separate external doors - household refrigerators: 8418.21 -- compression 8418.22 -- absorption electric 8418.29 -- other 8418.30 - freezers of the "chest" type, with a capacity not exceeding 800 liters 8418.40   - vertical type freezers with a capacity not exceeding 900 liters 8418.50 - refrigerating or freezing chambers, cabinets, display cases, counters and similar furniture with built-in refrigerating or freezing equipment, other - refrigerating or freezing equipment, other; heat pumps: 8418.61 -- compression type with condenser as heat exchanger 8418.69 -- other - parts: 8418.91 -- furniture for installation of refrigeration and freezing equipment 8418.99   -- other 84.19               Machinery, industrial or laboratory equipment with electric or non-electric heating (excluding furnaces, chambers and other equipment of heading 85.14) for processing materials in a temperature-varying process such as heating, cooking, roasting, distillation, rectification, sterilization, pasteurization, steaming, drying, evaporation, condensation or cooling, with the exception of machinery and equipment used for domestic purposes;                    inertia-free water heaters or thermal water accumulators, non-electric: - inertia-free water heaters or thermal water accumulators, non-electric: 8419.11 -- inertia-free gas water heaters 8419.19 -- other 8419.20 -- medical, surgical or laboratory sterilizers -- dryers: 8419.31 -- for agricultural products 8419.32  -- for wood, pulp, paper or cardboard 8419.39 -- other 8419.40 - distillation or distillation apparatus   -------------------------------------------------------------------  

     Section XVI Group 84 84.19 2 /22 1    

------------------------------------------------------------------- Commodity!  HS code !   position !          !   ------------------------------------------------------------------- 8419.50 - heat exchangers 8419.60 - machines for liquefying air or gases - other machines, aggregates and equipment: 8419.81 -- for preparing hot drinks or cooking or heating food 8419.89 -- other 8419.90 - parts 84.20 calenders or other rolling machines, other than machines for processing metal or glass, and rolls for them: 8420.10  - calenders or other rolling machines - parts: 8420.91 -- rolls 8420.99 -- other 84.21 Centrifuges, including centrifugal dryers;                    equipment and devices for filtering or purifying liquids or gases: - centrifuges, including centrifugal dryers: 8421.11 -- milk separators 8421.12 -- clothes dryers 8421.19 -- other - equipment for filtering or purifying liquids: 8421.21 -- for filtering or purifying water 8421.22 -- for filtering or purifying beverages other than water 8421.23  -- for filtering oil or fuel in internal combustion engines 8421.29 -- other - equipment for filtering or purifying gases: 8421.31 -- air filters for internal combustion engines 8421.39 -- other - parts: 8421.91 -- centrifuges, including centrifugal dryers 8421.99 -- other 84.22             Dishwashers; equipment for washing or drying bottles or other containers; equipment for filling, capping bottles, cans, closing boxes, bags or other containers, for sealing or labeling them; equipment for hermetically sealing caps or caps of bottles, cans, tubes and similar containers;                    packaging or wrapping equipment (including equipment wrapping goods with shrinkable packaging material)                    other; equipment for carbonating beverages: - dishwashers: 8422.11 -- household 8422.19 -- other   --------------------------------------------------------------------  

     Section XVI Group 84 84.22 2 /25 1    

------------------------------------------------------------------- Commodity!  HS code !   position !          !   ------------------------------------------------------------------- 8422.20 - equipment for washing or drying bottles or other containers 8422.30 - equipment for filling, sealing bottles, cans, closing boxes, bags or other containers, for sealing or labeling them; equipment for hermetically sealing caps or caps of bottles, cans, tubes and similar containers;                         equipment for carbonating beverages 8422.40 - equipment for packaging or wrapping (including equipment wrapping goods with shrinkable packaging material) other 8422.90 - parts 84.23             Weighing equipment (other than scales with a sensitivity of 0.05 g or higher), including calculating or control machines powered by gravity of the weight being weighed; balances for all types of scales: 8423.10 - scales for weighing people, including infants; household scales 8423.20 - scales for continuous weighing of products on conveyors 8423.30 - scales adjusted to a constant weight and scales loading cargo of a certain weight into a container or container, including hopper scales - other weighing equipment: 8423.81 -- with a maximum weighing weight of not more than 30 kg 8423.82  -- with a maximum weighing weight of more than 30 kg, but not more than 5,000 kg 8423.89 -- other 8423.90 - balances for scales of all types; parts of weighing equipment 84.24             Mechanical devices (with or without manual control) for throwing, spraying or spraying liquids or powders; fire extinguishers, whether or not charged; spray guns and similar devices; steam-jet or sandblasting and similar throwing devices: 8424.10 - fire extinguishers, whether or not charged 8424.20 - spray guns and similar devices 8424.30 - steam-jet or sandblasting machines and similar throwing devices - other devices: 8424.81 -- for agriculture or horticulture 8424.89 -- other 8424.90  - parts 84.25 Hoists and hoists, except skip hoists; winches and capstans; jacks: - hoists and hoists (except skip hoists or hoists used for lifting vehicles):              8425.11 -- powered by an electric motor 8425.19 -- other 8425.20 - winches of mine lifting installations of above-ground placement; winches specially designed for underground work   --------------------------------------------------------------------  

     Section XVI Group 84 84.25 2 /28 1    

------------------------------------------------------------------- Commodity!  HS code !   position !          !   ------------------------------------------------------------------- - other winches; capstans: 8425.31 -- powered by an electric motor 8425.39 -- other - jacks; lifts for lifting vehicles: 8425.41 -- stationary garage lifts 8425.42 -- hydraulic jacks and lifts, other 8425.49 -- other 84.26             Marine derrick cranes; lifting cranes, including cable cranes; mobile lifting trusses, gantry loaders and trolleys equipped with a crane: - overhead cranes, gantry cranes, gantry cranes and gantry loaders: 8426.11 -- bridge cranes on fixed supports 8426.12 -- mobile lifting trusses on wheels and gantry loaders 8426.19 -- other 8426.20 - tower cranes 8426.30  - gantry or boom cranes on a support - other self-propelled mechanisms: 8426.41 -- on wheels 8426.49 -- other - other mechanisms: 8426.91 -- intended for installation on road vehicles 8426.99 -- other 84.27             Fork lift trucks; other loaders equipped with lifting or loading and unloading equipment: 8427.10 - self-propelled loaders powered by an electric motor 8427.20 - other self-propelled loaders 8427.90 - other loaders 84.28             Machinery and devices for lifting, moving, loading or unloading (for example, elevators, escalators, conveyors, cable cars) other: 8428.10  - skip elevators and lifts 8428.20 - pneumatic lifts and conveyors - elevators and continuous conveyors for goods or materials other: 8428.31 -- specially designed for underground work 8428.32 -- bucket other 8428.33 -- belt other 8428.39 -- other 8428.40 - escalators and moving footpaths 8428.50  - pushers of mine trolleys, mechanisms for moving locomotives or wagons, car dumpers and similar equipment for manipulating railway wagons   --------------------------------------------------------------------  

     Section XVI Group 84 84.28 2 /31 1      

------------------------------------------------------------------- Commodity!  HS code !   position !          !   ------------------------------------------------------------------- 8428.60 - passenger and freight cable cars, ski lifts; traction mechanisms for funiculars 8428.90 - other equipment 84.29 Bulldozers with non-rotating and rotary blades, graders, planners, scrapers, mechanical shovels, excavators, single-bucket loaders, tamping machines and road rollers, self-propelled: - bulldozers with non-rotating and rotary blades: 8429.11 -- tracked 8429.19 -- other 8429.20  - graders and planners 8429.30 - scrapers 8429.40 - ramming machines and road rollers - mechanical shovels, excavators and single-bucket loaders: 8429.51 -- single-bucket front loaders 8429.52 -- full-turn machines 8429.59  -- other 84.30             Other machines and mechanisms for moving, planning, profiling, mining, ramming, compaction, excavation or drilling of soil, minerals or ores; equipment for driving and extracting piles;                    plough and rotary snow blowers: 8430.10 - equipment for driving and extracting piles 8430.20 - plough and rotary snow blowers - cutting machines for mining coal or rocks and tunneling machines: 8430.31 -- self-propelled 8430.39 -- other - drilling or tunneling machines other: 8430.41 -- self-propelled 8430.49 -- other 8430.50 - other self-propelled machines and mechanisms                       - other non-self-propelled machines and mechanisms: 8430.61 -- machines and mechanisms for tamping or sealing 8430.69 -- other 84.31 Parts intended solely or primarily for the equipment of headings 84.25-84.30: 8431.10 - machines or mechanisms of heading 84.25 8431.20 - machines or mechanisms of heading 84.27 - machines or mechanisms of heading 84.28: 8431.31  -- elevators, skip lifts or escalators 8431.39 -- other   --------------------------------------------------------------------  

Section XVI Group 84 84.31 2 /34    

------------------------------------------------------------------- Commodity!  HS code !   position !          !   ------------------------------------------------------------------ machines or mechanisms of heading 84.26, 84.29 or 84.30: 8431.41 -- buckets, grapples, grippers and ladles 8431.42 -- non-rotating or rotary bulldozer dumps 8431.43 -- parts of drilling or sinking machines of subheading 8430.41 or 8430.49 8431.49  -- other 84.32             Agricultural, horticultural or forestry machines for preparing and cultivating the soil; lawn or sports ground rollers: 8432.10 - plough harrows, rippers, cultivators, pololniks and hoes: 8432.21 -- disc harrows 8432.29 -- other 8432.30 - seeders, planters and seedling machines 8432.40 - spreaders and distributors of organic and mineral fertilizers 8432.80 - other machines 8432.90  - parts 84.33             Machines or mechanisms for harvesting or threshing crops, including balers, baling presses for straw or hay; mowers or lawn mowers; machines for cleaning, sorting or calibrating eggs, fruits or other agricultural products, other than machines of heading 84.37: - lawn mowers, parks or playgrounds: 8433.11 -- motor mowers with a cutting part rotating in a horizontal plane 8433.19 -- other 8433.20 - mowers, including those mounted on tractors, other 8433.30  - other hay harvesting machines 8433.40 - presses for packing straw or hay into bales, including balers - other harvesting machines; threshing machines or mechanisms: 8433.51 -- combine harvesters 8133.52 -- other threshing machines or mechanisms 8433.53 -- machines for harvesting tubers or root crops 8433.59 -- other 8433.60 - machines for cleaning, sorting or calibrating eggs, fruits or other agricultural products 8433.90  - parts 84.34             Milking machines and apparatuses, equipment for processing and processing of milk: 8434.10 - milking machines and apparatuses 8434.20 - equipment for processing and processing of milk 8434.90 - parts   -------------------------------------------------------------------  

     Section XVI Group 84 84.35/38    

------------------------------------------------------------------- Commodity!  HS code !   position !          !   --------------------------------------------------------------------  84.35             Presses, crushers and similar equipment for winemaking, production of cider, fruit juices or similar beverages: 8435.10 - equipment 8435.90  - parts 84.36             Equipment for agriculture, horticulture, forestry, poultry farming or beekeeping, including equipment for seed germination with mechanical or heating devices, other; poultry incubators and brooders: 8436.10 - machines and mechanisms for preparing animal feed - poultry farming equipment; incubators and brooders: 8436.21 -- incubators and brooders 8436.29 -- other 8436.80 - other equipment - parts: 8436.91 -- poultry equipment or incubators and brooders 8436.99 -- other 84.37             Machines for cleaning, sorting or calibrating seeds, grains or dry legumes; equipment for the milling industry or for processing grain or dry legumes, other than equipment used on agricultural farms: 8437.10 - machines for cleaning, sorting or calibrating seeds, grain or dry legumes 8437.80 - other equipment 8437.90  - parts 84.38             Equipment for the industrial preparation or production of foodstuffs or beverages, not elsewhere specified or included in this chapter, other than equipment for the extraction or preparation of animal or non-volatile vegetable fats or oils: 8438.10 - equipment for the production of bakery products, pasta, spaghetti or similar products 8438.20  - equipment for the confectionery industry, cocoa powder or chocolate production 8438.30 - equipment for the sugar industry 8438.40 - equipment for the brewing industry 8438.50 - equipment for processing meat or poultry 8438.60 - equipment for processing fruits, nuts or vegetables 8438.80 - other equipment 8438.90 - parts   --------------------------------------------------------------------  

     Section XVI Group 84 84.39/42    

------------------------------------------------------------------- Commodity!  HS code !   position !          !   -------------------------------------------------------------------  84.39             Equipment for the production of pulp from fibrous cellulosic materials or for the manufacture or finishing of paper or cardboard: 8439.10 - equipment for the production of pulp from fibrous cellulosic materials 8439.20 - equipment for the manufacture of paper or cardboard 8439.30 - equipment for finishing paper or cardboard - parts: 8439.91  -- equipment for the production of pulp from fibrous cellulosic materials 8439.99 -- other 84.40             Bookbinding equipment, including machines for stitching book blocks: 8440.10 - equipment 8440.90 - parts 84.41             Equipment for the production of products from paper pulp, paper or cardboard, including cutting machines of all types, other: 8441.10 - cutting machines 8441.20  - machines for making bags, bags or envelopes 8441.30 - machines for making card boxes, boxes, boxes, pipes, drums or similar containers by methods other than molding 8441.40 - machines for molding products made of paper pulp, paper or cardboard 8441.80 - other equipment 8441.90  - parts 84.42             Machines, apparatus and accessories (other than machine tools of headings 84.56-84.65) for font casting or typesetting, for the preparation or manufacture of printing blocks, plates, cylinders or other typographic elements; typographic fonts, blocks, plates, cylinders and other typographic elements; blocks, plates, cylinders and lithographic stones prepared for printing purposes (for example, turned, ground or polished): 8442.10 - photo typesetting machines 8442.20 - machines, equipment and accessories for typesetting in other ways, with or without a casting device 8442.30 - other machines, equipment and accessories 8442.40  - parts for the above-mentioned machines, equipment or accessories 8442.50 - typographic fonts, blocks, plates, cylinders and other typographic elements; blocks, plates, cylinders and lithographic stones prepared for printing purposes (for example, turned, ground or polished)   --------------------------------------------------------------------  

     Section XVI Group 84 84.43/45    

------------------------------------------------------------------- Commodity!  HS code !   position !          !   -------------------------------------------------------------------  84.43             Printing machines used for printing by means of typographic fonts, blocks, plates, cylinders and other typographic elements of heading 84.42; inkblasting printing machines, other than those included in heading 84.71;                    auxiliary machines used in the printing process: - machines for offset printing: 8443.11 -- rolled 8443.12 -- sheet, office (sheet size not exceeding 22 x 36 cm) 8443.19 -- other - machines for printing high-quality printing, except flexographic: 8443.21 -- rolled 8443.29 -- other 8443.30 - machines for flexographic printing 8443.40  - gravure printing machines - other printing machines: 8443.51 -- inkblasting printing machines 8443.59 -- other 8443.60 - auxiliary equipment 8443.90 - parts 84.44 8444.00 Machines for extruding, stretching, texturing or cutting artificial textile materials. 84.45             Textile fiber preparation machines;                    spinning, twisting or twisting machines and other equipment for the manufacture of textile yarn;                    cocoon-winding or coiling (including weft-winding) textile machines and machines preparing textile yarn for use on machines of heading 84.46 or 84.47: - machines for preparing textile fibers: 8445.11 -- carding 8445.12 -- combing 8445.13 -- ribbon or roving 8445.19 -- other 8445.20 - spinning textile machines 8445.30  - reed or twisting textile machines 8445.40 - winding textile machines (including weft winding) or cocoon winding machines 8445.90 - other   --------------------------------------------------------------------  

     Section XVI Group 84 84.46/48 1    

------------------------------------------------------------------- Commodity!  HS code !   position !          !   -------------------------------------------------------------------  84.46             Weaving machines: 8446.10 - for the manufacture of fabrics with a width of not more than 30 cm - shuttle machines for the manufacture of fabrics with a width of more than 30 cm: 8446.21 -- powered by an engine 8446.29 -- other 8446.30  - spotless for the manufacture of fabrics with a width of more than 30 cm 84.47             Knitting machines, knitting and stitching machines, for producing braid thread, tulle, lace, embroidery, braiding or nets and tufting machines: - circular knitting machines: 8447.11 -- with a cylinder with a diameter of not more than 165 mm 8447.12 -- with a cylinder with a diameter of more than 165 mm 8447.20 - flat knitting machines; knitting and sewing machines 8447.90 - other 84.48             Auxiliary equipment for use with machines of heading 84.44, 84.45, 84.46 or 84.47 (for example, lifting carriages, jacquard machines, automatic stop mechanisms, shuttle changing mechanisms); parts and accessories intended solely or principally for machines of this heading or heading 84.44, 84.45, 84.46 or 84.47 (for example, spindles and rods, needle sets, combs, nozzles, shuttles, remizki and remizny frames, knitted needles):                       - auxiliary equipment for machines of heading 84.44, 84.45, 84.46 or 84.47: 8448.11  -- lifting carriages and jacquard machines; mechanisms for reducing the number of cards, copying, cardboard cutting or filing machines for use in conjunction with the aforementioned machines 8448.19 -- other 8448.20 - parts and accessories for machines of heading 84.44 or their auxiliary devices                       - parts and accessories for machines of heading 84.45 or their auxiliary devices: 8448.31 -- needle set 8448.32 -- machines for preparing textile fibers, other than needle set 8448.33 -- spindles, coils, rings and runners 8448.39 -- other - parts and accessories for looms or their auxiliary devices: 8448.41 -- shuttles 8448.42  -- berda, remizki and remizny frames for looms 8448.49 -- other - parts and accessories for machines of heading 84.47 or their auxiliary devices:   --------------------------------------------------------------------  

     Section XVI Group 84 84.48 2 /52 1    

------------------------------------------------------------------- Commodity!  HS code !   position !          !   ------------------------------------------------------------------ 8448.51 -- platinum, needles and other elements used to form loops, seams, stitches, weaves 8448.59 -- other 84.49 8449.00 Equipment for the production or finishing of felt or felt or nonwovens in a piece or in a cut, including equipment for the production of felt hats; dummies for the manufacture of hats.  84.50             Washing, household or laundry machines, including machines equipped with a wringing device: - machines with a capacity of not more than 10 kg of dry laundry: 8450.11 -- fully automatic machines 8450.12 -- machines with integrated centrifugal wringing device other 8450.19 -- other 8450.20 - machines with a capacity of more than 10 kg of dry laundry 8450.90  - parts 84.51               Equipment (other than machines of heading 84.50) for washing, cleaning, pressing, drying, ironing, pressing (including presses for thermofixing materials), bleaching, dyeing, dressing, finishing, coating or impregnating yarns, fabrics or finished textiles, and machines for applying paste to woven or other substrates used in manufacture of floor coverings, such as linoleum;                    machines for winding, unwinding, folding, cutting or piercing textile fabrics: 8451.10 - machines for dry cleaning - drying machines: 8451.21 -- with a capacity not exceeding 10 kg of dry laundry 8451.29 -- other 8451.30 - ironing machines and presses (including presses for thermal fixation of materials)              8451.40 - washing, bleaching or dyeing machines 8451.50  - machines for winding, unwinding, folding, cutting or piercing textile fabrics 8451.80 - other equipment 8451.90 - parts 84.52             Sewing machines, other than machines for sewing book blocks of heading 84.40; furniture, bases and cases designed specifically for sewing machines; sewing machine needles: 8452.10 - household sewing machines - sewing machines other: 8452.21 -- automatic 8452.29 -- other   --------------------------------------------------------------------  

     Section XVI Group 84 84.52 2 /56    

------------------------------------------------------------------- Commodity!  HS code !   position !          !   ------------------------------------------------------------------- 8452.30 - sewing machine needles 8452.40 - furniture, bases and cases designed specifically for sewing machines, and parts thereof 8452.90 - other sewing machine parts 84.53             Equipment for preparing, tanning or processing hides or skins, or for making or repairing shoes or other articles made of hides or skins, other than sewing machines: 8453.10  - equipment for the preparation, tanning or processing of hides or skins 8453.20 - equipment for the manufacture or repair of shoes 8453.80 - other equipment 8453.90 - parts 84.54             Converters, casting ladles, mills, and casting machines used in metallurgy or foundry production:              8454.10 - converters 8454.20 - mills and buckets 8454.30 - casting machines 8454.90  - parts 84.55             Metal rolling mills and rolls for them: 8455.10 - pipe rolling mills - other rolling mills: 8455.21 -- hot rolling or combined hot and cold rolling mills 8455.22 -- cold rolling 8455.30 -- rolls for rolling mills 8455.90  - other parts 84.56             Machines for processing any materials by removing material using laser or other light or photon beam, ultrasonic, electric discharge, electrochemical, electron beam, ion beam or plasma arc processes: 8456.10 - operating using laser or other light or photon radiation processes 8456.20  - working using ultrasonic processes 8456.30 - working using electric discharge processes - other: 8456.91 -- for dry etching of a pattern on semiconductor materials 8456.99 -- other   --------------------------------------------------------------------  

     Section XVI Group 84 84.57/60 1      

------------------------------------------------------------------- Commodity!  HS code !   position !          !   ------------------------------------------------------------------- 84.57 Machining centers, single-position and multi-position aggregate machines, for metalworking: 8457.10 - machining centers 8457.20 - single-position aggregate machines 8457.30 - multi-position aggregate machines 84.58             Lathes (including multi-purpose lathes), metal cutting: - horizontal: 8458.11  -- numerically controlled 8458.19 -- other - lathes other: 8458.91 -- numerically controlled 8458.99  -- other 84.59             Metal-cutting machines (including linear-type aggregate machines) for drilling, boring, milling, cutting external or internal threads by removing metal, other than lathes (including multi-purpose lathes) of heading 84.58: 8459.10 - linear-type aggregate machines - other drilling machines: 8459.21 -- numerically controlled 8459.29 -- other - boring and milling machines other: 8459.31 -- numerically controlled 8459.39 -- other 8459.40 - boring machines other - cantilever milling machines: 8459.51 - numerically controlled 8459.59 -- other - milling machines other: 8459.61 -- numerically controlled 8459.69 -- other 8459.70 - other threading machines 84.60             Grinding, grinding, grinding, honing, lapping, polishing machines and for performing other finishing operations of metals or cermets using grinding stones, abrasives or polishing agents, other than tooth-cutting, tooth-grinding or tooth-finishing machines of heading 84.61:                       - surface grinding machines with positioning accuracy on any axis not less than 0.01 mm: 8460.11 -- numerically controlled 8460.19 -- other   --------------------------------------------------------------------  

     Section XVI Group 84 84.60 2 /62    

------------------------------------------------------------------- Commodity!  HS code !   position !          !   ------------------------------------------------------------------ - grinding machines with an accuracy of positioning on any axis not less than 0.01 mm, other: 8460.21 -- numerically controlled 8460.29 -- other - sharpening machines (for cutting tools):              8460.31 -- numerically controlled 8460.39 -- other 8460.40 - honing or finishing machines 8460.90  - other 84.61                Longitudinal, transverse, slotting, broaching, tooth-cutting, tooth-grinding or tooth-finishing, sawing, cutting and other machines for processing metals or cermets by removing material, not elsewhere specified or included: 8461.20 - transverse or slotting machines 8461.30 - broaching machines 8461.40  - tooth-cutting, tooth-grinding or tooth-finishing machines 8461.50 - sawing or cutting machines 8461.90 - other 84.62             Machine tools (including presses) for metalworking by bulk stamping, forging or stamping; metalworking machines (including presses) bending, edge-bending, regular, cut-off, punching or cutting; presses for processing metals or metal carbides, not specified above: 8462.10 - forging or stamping machines (including presses) and hammers - bending, edge-bending, regular machines (including presses):              8462.21 -- numerically controlled 8462.29 -- other - mechanical shears (including presses), except for combined punching and die-cutting: 8462.31  -- numerically controlled 8462.39 -- other - punching or cutting machines (including presses), including combined punching and die-cutting: 8462.41 -- numerically controlled 8462.49 -- other - other: 8462.91 -- hydraulic presses 8462.99 -- other   --------------------------------------------------------------------  

 Section XVI Group 84 84.63/66    

------------------------------------------------------------------- Commodity!  HS code !   position !          !   -------------------------------------------------------------------  84.63             Machines for processing metals or cermets without removing other material: 8463.10 - machines for drawing rods, pipes, profiles, wire or similar products 8463.20 - rolling machines 8463.30 - machines for making wire products 8463.90 - other 84.64             Machines for processing stone, ceramics, concrete, asbestos cement or similar mineral materials, or for cold processing of glass: 8464.10 - sawing machines 8464.20 - grinding or polishing machines 8464.90  - other 84.65             Machines (including machines for assembling with nails, staples, glue or other methods) for processing wood, cork, bone, ebonite, hard plastics or similar hard materials: 8465.10 - machines capable of performing various metalworking operations without changing tools between these operations - other: 8465.91 -- mechanical saws 8465.92  -- planing, milling or planing machines 8465.93 -- grinding, sand-grinding or polishing machines 8465.94 -- bending or assembly machines 8465.95 -- drilling or slotting machines 8465.96 -- chopping, crushing or peeling machines 8465.99  -- Other 84.66 Parts and accessories intended solely or primarily for the equipment of headings 84.56 to 84.65, including attachments for fixing tools or parts, self-opening threading heads, dividing heads and other special devices for machine tools; fixtures for fixing working tools for all types of hand tools: 8466.10 - fixtures for fixing tools and self-opening threading heads 8466.20 - fixtures for fixing machined parts 8466.30 - dividing heads and other special fixtures for machine tools - other: 8466.91 -- for machines of heading 84.64 8466.92  -- to machines of heading 84.65 8466.93 -- to machines of headings 84.56-84.61 8466.94 -- to machines of heading 84.62 or 84.63   --------------------------------------------------------------------  

     Section XVI Group 84 84.67/70 1    

------------------------------------------------------------------- Commodity!  HS code !   position !          !   ------------------------------------------------------------------- 84.67 Hand tools, pneumatic, hydraulic or with an integrated electric or non-electric motor: - pneumatic: 8467.11 -- rotary action (including combined rotary-impact action) 8467.19 -- other - with an integrated electric motor: 8467.21  -- drills of all types 8467.22 -- saws 8467.29 -- other - other tools: 8467.81 -- chain saws 8467.89 -- other - parts: 8467.91 -- chain saws 8467.92 -- pneumatic tools 8467.99  -- other 84.68             Equipment and apparatus for low-temperature soldering, high-temperature soldering or welding, whether or not suitable for cutting, other than machines and apparatus of heading 85.15;                    machines and apparatus for surface heat treatment powered by gas: 8468.10 - gas burners with blast, manual 8468.20 - equipment and apparatus powered by gas, other 8468.80 - equipment and apparatus other 8468.90 - parts 84.69             Typewriters, other than printers of heading 84.71; devices for text processing: - automatic typewriters and devices for text processing: 8469.11 -- devices for text processing 8469.12 -- automatic typewriters 8469.20 - electric typewriters, other 8469.30  - other non-electric typewriters 84.70             Calculating machines and pocket machines for recording, reproducing and visually presenting data with computational functions; accounting machines, postal marking machines, ticket machines and other similar machines with calculating devices; cash registers: 8470.10 - electronic calculators capable of operating without an external power source, and pocket machines for recording, reproducing and visually presenting data with computing functions - other electronic calculating machines:   --------------------------------------------------------------------  

      Section XVI Group 84 84.70 2 /72    

------------------------------------------------------------------- Commodity!  HS code !   position !          !   ------------------------------------------------------------------- 8470.21 -- with integrated printer 8470.29 -- other 8470.30 - other counting machines 8470.40 - accounting machines 8470.50 - cash registers 8470.90 - other 84.71             Computing machines and their blocks; magnetic or optical reading devices, machines for transferring data to information carriers in encoded form and machines for processing similar information, not elsewhere specified or included: 8471.10 - analog or hybrid computing machines 8471.30  - portable digital computing machines weighing not more than 10 kg, consisting of at least a central data processing unit, a keyboard and a display - other digital computing machines: 8471.41 -- containing in one housing at least a central data processing unit and an input and output device, combined or not 8471.49 - supplied as other systems 8471.50  - digital data processing units other than those described in subheading 8471.41 or 8471.49, containing or not containing in one housing one or two of the following devices: storage devices, input devices, output devices 8471.60 - input or output devices containing or not containing in one housing storage devices 8471.70 - storage devices 8471.80  - other computer devices 8471.90 - other 84.72             Office equipment (for example, hectographic or stencil multipliers, addressing machines, automatic devices for issuing banknotes, machines for sorting, counting or packaging coins, pencil sharpening machines, punching machines or stapling machines) other: 8472.10  - copying and multiplying machines 8472.20 - addressing machines and for squeezing out address cliches 8472.30 - machines for sorting or folding, or putting into envelopes, or tying postal correspondence, machines for opening, closing or sealing postal correspondence and machines for gluing or blanking postage stamps 8472.90 - other   --------------------------------------------------------------------  

     Section XVI Group 84 84.73/75    

------------------------------------------------------------------- Commodity!  HS code !   position !          !   ------------------------------------------------------------------- 84.73 Parts and accessories (other than cases, transport cases and similar articles) intended exclusively or mainly for machines of headings 84.69-84.72: 8473.10 - parts and accessories of machines of heading 84.69 - parts and accessories of machines of heading 84.70: 8473.21 -- electronic counting machines of subheadings 8470.10, 8470.21 or 8470.29 8473.29 -- other 8473.30 - machine parts and accessories of heading 84.71 8473.40 - machine parts and accessories of heading 84.72 8473.50 - parts and accessories equally intended for machines belonging to two or more headings 84.69-84.72 84.74             Equipment for sorting, screening, separating, washing, crushing, grinding, mixing or mixing soil, stone, ores or other minerals in a solid (including powdery or pasty) state; equipment for agglomeration, molding or casting of solid mineral fuels, ceramic compounds, uncured cement, gypsum materials or other mineral products in powdered or pasty state; molding machines for making sand molds: 8474.10 - machines for sorting, screening, separating or washing 8474.20 - machines for crushing or grinding - machines for mixing or mixing: 8474.31 -- concrete mixers or mortar mixers 8474.32 - machines for mixing minerals with bitumen 8474.39 -- other 8474.80 - other 8474.90  - parts 84.75             Machines for assembling electric or electronic lamps, tubes or cathode ray tubes or gas-discharge lamps in glass flasks;                    machines for the manufacture or hot processing of glass or glass products: 8475.10 - machines for the assembly of electric or electronic lamps, tubes or cathode ray tubes or gas-discharge lamps in glass flasks - machines for the manufacture or hot processing of glass or glass products: 8475.21 -- machines for the manufacture of optical fiber and its blanks 8475.29  -- other 8475.90 - parts   --------------------------------------------------------------------  

     Section XVI Group 84 84.76/79 1    

------------------------------------------------------------------- Commodity!  HS code !   position !          !   -------------------------------------------------------------------  84.76             Vending machines (for example, for the sale of postage stamps, cigarettes, foodstuffs or beverages), including vending machines for banknotes and coins: - vending machines for drinks: 8476.21 -- with integrated heating or cooling devices 8476.29 -- other - other machines: 8476.81  -- with integrated heating or cooling devices 8476.89 -- other 8476.90 - parts 84.77             Equipment for processing rubber or plastics and for the production of products from these materials, not elsewhere specified or included in this chapter: 8477.10 - injection molding machines 8477.20 - extruders 8477.30 - blow molding machines 8477.40  - vacuum casting machines and other thermoforming machines - machines for casting or molding in any other way, other: 8477.51 -- for casting or restoring the tread of pneumatic tires or for casting or other type of molding chambers of pneumatic tires 8477.59 -- other 8477.80 - other equipment 8477.90  - parts 84.78             Tobacco preparation or preparation equipment, not elsewhere specified or included in this chapter: 8478.10 - equipment 8478.90 - parts 84.79             Machines and mechanical devices having individual functions, not elsewhere specified or included in this chapter: 8479.10  - equipment for public works, construction or other similar work 8479.20 - equipment for extracting or cooking animal or non-volatile vegetable fats or oils 8479.30 - presses for the manufacture of particle board or fiberboard or slabs of other fibrous materials and other machines for processing wood or cork 8479.40  - machines for making ropes or cables 8479.50 - industrial robots, not elsewhere specified or included 8479.60 - evaporative type air coolers - other machines and mechanical devices:   --------------------------------------------------------------------  

     Section XVI Group 84 84.79 2 /82    

------------------------------------------------------------------- Commodity!  HS code !   position !          !   ------------------------------------------------------------------- 8479.81 -- for metalworking, including machines for winding electrical wires onto coils 8479.82 -- for mixing, stirring, crushing, grinding, screening, sieving, homogenizing, emulsifying or stirring 8479.89 -- other 8479.90 - parts 84.80             Flanks for metal foundry production; casting pallets; casting models; molds for casting metals (other than molds), metal carbides, glass, mineral materials, rubber or plastics: 8480.10 - flasks for foundry production 8480.20 - casting trays 8480.30 - casting models - molds for casting metals or metal carbides: 8480.41 -- for injection molding or blowing 8480.49 -- other 8480.50 - molds for casting glass 8480.60  - molds for casting mineral materials - molds for casting rubber or plastics: 8480.71 -- for injection molding or blow molding 8880.79 -- other 84.81                Taps, valves, valves and similar fittings for pipelines, boilers, tanks, cisterns, tanks or similar containers, including pressure reducing and temperature-controlled valves: 8481.10 - pressure reducing valves 8481.20  - valves for oil-hydraulic or pneumatic transmissions 8481.30 - non-return valves              8481.40 - safety or discharge valves 8481.80 - other fittings 8481.90 - parts 84.82             Ball or roller bearings: 8482.10 - ball bearings 8482.20 - tapered roller bearings, including inner tapered rings with cage and roller assemblies 8482.30  - spherical roller bearings 8482.40 - needle roller bearings 8482.50 - bearings with cylindrical rollers, other 8482.80 - bearings, including other combined ball-roller bearings - parts: 8482.91 -- balls, needle rollers and rollers 8482.99 -- other   --------------------------------------------------------------------  

     Section XVI Group 84 84.83/85    

------------------------------------------------------------------- Commodity!  HS code !   position !          !   ------------------------------------------------------------------- 84.83 Transmission shafts (including cam and crankshafts) and cranks; bearing housings and sliding bearings for shafts; gears and gears; ball or roller screw gears; gearboxes and other speed variators, including torque converters;                    flywheels and pulleys, including pulley blocks; couplings and shaft connection devices (including universal hinges):              8483.10 - transmission shafts (including cam and crankshafts) and cranks 8483.20 - bearing housings with integrated ball or roller bearings 8483.30 - bearing housings without integrated ball or roller bearings; sliding bearings for shafts 8483.40 - gears, except gears, sprockets and other separately supplied gear elements; ball or roller screw gears; gearboxes and other speed variators, including torque converters 8483.50 - flywheels and pulleys, including pulley blocks 8483.60 - couplings and shaft connection devices (including universal joints)              8483.90 - gears, sprockets and other gear elements, presented separately;                         parts 84.84               Gaskets and similar connecting elements made of sheet metal in combination with other material or consisting of two or more layers of metal; sets or sets of gaskets and similar connecting elements, of various compositions, packed in bags, envelopes or similar packaging; mechanical seals: 8484.10 - gaskets and similar connecting elements made of sheet metal in combination with other material or consisting of two or more metal layers 8484.20 - mechanical seals 8484.90  - other 84.85 Parts of equipment not having electrical connections, insulators, contacts, coils or other electrical parts, not elsewhere specified or included in this chapter: 8485.10 - propellers for ships and their blades 8485.90 - other   --------------------------------------------------------------------  

    Section XVI Group 85 Notes    

        Group 85 Electrical machinery and equipment, their parts;   sound recording and sound reproducing equipment, equipment for recording and reproducing television images and sound, their parts and accessories  

Notes: 1.- This chapter does not include: (a) blankets, mattresses, pillows, foot warmers, electrically heated or similar articles; clothing, shoes or headphones or other electrically heated items used by humans; (b) glass products of heading 70.11; or (c) furniture with electric heating groups 94.         2.- Headings 85.01-85.04 do not include goods of headings 85.11, 85.12, 85.40, 85.41 or 85.42.         However, mercury-arc rectifiers with metal tanks are included in heading 85.04.         3.- Heading 85.09 includes only the following types of electromechanical machines commonly used in household use: (a) vacuum cleaners, including vacuum cleaners for dry and wet cleaning, polishers, food choppers, mixers, juicers for fruits and vegetables, having any weight; (b) other machines weighing not more than 20 kg.         However, this heading does not include fans or ventilation or recirculating fume hoods with a fan, with or without filters (heading 84.14), centrifugal tumble dryers (heading 84.21), dishwashers (heading 84.22), household washing machines (heading 84.50), roller or other ironing machines (heading 84.20 or 84.51), sewing machines (heading 84.52), electric scissors (heading 84.67) or electric heating appliances (heading 85.16).         4.- For the purposes of heading 85.34, the term "printed circuits" means circuits made by forming on an insulating substrate using any printing process (for example, electroplating, etching) or using "film" technology of conductors, contacts or other printed elements (for example, inductors, resistors, capacitances), separate or connected in no particular order, except for elements that are capable of creating, rectifying, modulating, or amplifying an electrical signal (for example, semiconductor elements).         The term "printed circuits" does not include circuits combined with elements other than those obtained during the printing process, as well as individual discrete resistors, capacitors, or inductors. However, printed circuits can be equipped with connecting elements manufactured using a different technology than printed circuits.         Thin- or thick-film circuits using passive and active elements obtained during the same technological process are included in heading 85.42.         5.- For the purposes of headings 85.41 and 85.42: (A) "Diodes, transistors and similar semiconductor devices" means semiconductor devices whose operation is based on a change in their resistance under the action of an electric field.         (B) "Electronic integrated circuits and microassemblies": (a) monolithic integrated circuits in which elements (diodes, transistors, resistors, capacitances, inter-element connections, etc.) are made mainly in the volume and on the surface of a semiconductor material (for example, doped silicon) and are inextricably linked;         (b) hybrid integrated circuits in which passive elements (resistors, capacitances, inter-element connections, etc.) made using thin- or thick-film technology processes and active elements (diodes, transistors, microcircuits) obtained using semiconductor technology processes are connected into a single inseparable whole on a single insulating substrate (glass, ceramics, etc.). Such circuits may also include discrete components.;         (c) microassemblies such as a molded block, micromodule or similar types, consisting of discrete, active or active and passive components, matched and interconnected.         In classifying the products named in this note, headings 85.41 and 85.42 have precedence over any other item in the Nomenclature, which may include these products in accordance, in particular, with their function.  

     Section XVI Group 85 85.01/02 1    

     6.- Records, tapes and other information carriers of heading 85.23 or 85.24, presented together with the equipment for which they are intended, are included in these headings.         This note does not apply to such media if they are presented together with goods other than the equipment for which they are intended.         7.- In heading 85.48, "spent primary cells, spent primary batteries and spent electric accumulators" include devices that are unsuitable for their intended purpose due to damage, wear or other reasons, as well as those that cannot be recharged.  

     Notes to subheadings: 1.- Subheadings 8519.92 and 8527.12 include only cassette players with an integrated amplifier, without an integrated loudspeaker, capable of operating without an external power source, with dimensions not exceeding 170 x 100 x 45 mm.         2.- For the purposes of subheading 8542.10, the term "smart cards" means cards which have an integrated electronic integrated circuit (microprocessor) of any type in the form of a crystal and which may or may not have a magnetic stripe.     ------------------------------------------------------------------- Commodity!  HS code !   position !          !   ------------------------------------------------------------------- 85.01 Electric motors and generators (except for electric generating sets): 8501.10 - motors with a power not exceeding 37.5 W 8501.20 - universal AC motors/                         DC motors with a power exceeding 37.5 w - other DC motors; DC generators: 8501.31 -- with a power of not more than 750 W 8501.32 -- with a power of more than 750 W but not more than 75 kW 8501.33 -- with a power of more than 75 kW but not more than 375 kW 8501.34 -- with a power of more than 375 kW 8501.40 - single-phase alternating current motors - other multiphase alternating current motors: 8501.51 -- with a power of not more than 750 W 8501.52 -- with a power exceeding 750 W but not exceeding 75 kW 8501.53  -- with a capacity exceeding 75 kW - alternators (synchronous generators):              8501.61 -- with a capacity of not more than 75 kVA 8501.62 -- with a capacity of more than 75 kVA, but not more than 375 kVA 8501.63 -- with a capacity of more than 375 kVA, but not more than 750 kVA 8501.64 -- with a capacity of more than 750 kVA 85.02 Electric generating units and rotating electric converters:                       - electric generator sets with an internal combustion piston engine with compression ignition (diesel or semi-diesel): 8502.11 -- with a capacity of not more than 75 kVA 8502.12 -- with a capacity of more than 75 kVA but not more than 375 kVA 8502.13 -- with a capacity of more than 375 kVA 8502.20 -- electric generator sets with an internal combustion piston engine with spark ignition   --------------------------------------------------------------------  

     Section XVI Group 85 85.02 2 /06 1    

------------------------------------------------------------------- Commodity!  HS code !   position !          !   ------------------------------------------------------------------- - other electric generating sets: 8502.31 -- wind power 8502.39 -- other 8502.40 - electric rotating converters 85.03 8503.00 Parts intended exclusively or mainly for machines of heading 85.01 or 85.02.  85.04             Electric transformers, static electric converters (for example, rectifiers), inductors and chokes: 8504.10 - ballast elements for discharge lamps or tubes - liquid dielectric transformers: 8504.21 -- with a capacity of not more than 650 kVA 8504.22 -- with a capacity of more than 650 kVA, but not more than 10,000 kVA 8504.23 -- with a capacity of more than 10,000 kVA                       - other transformers: 8504.31 -- with a capacity of not more than 1 kVA 8504.32 -- with a capacity of more than 1 kVA, but not more than 16 kVA 8504.33 -- with a capacity of more than 16 kVA, but not more than 500 kVA 8504.34 -- with a capacity of more than 500 kVA 8504.40 - static converters 8504.50 - inductors and chokes other 8504.90 - parts 85.05 Electromagnets; permanent magnets and products designed to be converted into permanent magnets after magnetization;                    electromagnetic or permanent magnet clamping chucks, grippers and similar locking devices; electromagnetic clutches, clutches and brakes; electromagnetic lifting heads: - permanent magnets and articles designed to turn into permanent magnets after magnetization: 8505.11 -- metal 8505.19 -- other 8505.20 - electromagnetic clutches, clutches and brakes 8505.30 - electromagnetic lifting heads 8505.90 - other, including parts 85.06               Primary cells and primary batteries: 8506.10  - Dioxide-manganese 8506.30 - oxide-mercury 8506.40 - oxide-silver 8506.50 - lithium   --------------------------------------------------------------------  

     Section XVI Group 85 85.06 2 /11 1    

------------------------------------------------------------------- Commodity!  HS code !   position !          !   ------------------------------------------------------------------- 8506.60 - zinc-air 8506.80 - primary cells and other primary batteries 8506.90 - parts 85.07 Electric accumulators, including separators for them, rectangular (including square) or any other shape: 8507.10 - lead used to start piston engines 8507.20 - other lead accumulators 8507.30   - cadmium-nickel 8507.40 - iron-nickel 8507.80 - other batteries 8507.90 - parts [85.08] 85.09              Electromechanical household machines with built-in electric motors: 8509.10 - vacuum cleaners, including vacuum cleaners for dry and wet cleaning 8509.20 - polishers 8509.30 - kitchen waste disposers 8509.40 - food choppers and mixers;                          fruit or vegetable juicers 8509.80 - other appliances 8509.90 - parts 85.10 Electric shavers, hair clippers and hair removal devices with integrated electric motor: 8510.10 - electric shavers 8510.20 - hair clippers 8510.30 - hair removal devices 8510.90   - parts 85.11 Electrical equipment for igniting or starting internal combustion engines with ignition from a spark or from compression of a combustible mixture (for example, magneto, ignition coils, spark plugs, glow plugs, starters); generators (for example, direct current and alternating current) and interrupters of the type used with such engines: 8511.10 - spark plugs 8511.20 - magneto of various types; magnetic flywheels 8511.30 - distributors; ignition coils   --------------------------------------------------------------------  

     Section XVI Group 85 85.11 2 /15 1    

------------------------------------------------------------------- Commodity!  HS code !   position !          !   ------------------------------------------------------------------- 8511.40 - starters and starter generators 8511.50 - other generators 8511.80 - other equipment 8511.90 - parts 85.12             Electric lighting or alarm equipment (other than articles of heading 85.39), windscreen wipers, de-icers and de-foggers used on bicycles or motor vehicles: 8512.10  - lighting or visual alarm devices used on bicycles 8512.20 - other lighting or visual alarm devices 8512.30 - acoustic alarm devices 8512.40 - windscreen wipers, de-icers and de-foggers 8512.90  - parts 85.13 Portable electric lanterns powered by their own energy source (for example, dry cell batteries, accumulators, magneto), other than lighting equipment of heading 85.12: 8513.10 - lanterns 8513.90 - parts 85.14             Industrial or laboratory electric furnaces and chambers (including those operating on the basis of induction or dielectric loss phenomena); industrial or laboratory equipment for heat treatment of materials using the phenomenon of induction or dielectric losses: 8514.10 - furnaces and resistance chambers 8514.20 - furnaces and chambers operating on the basis of the phenomenon of induction or dielectric losses 8514.30 - furnaces and chambers other 8514.40  - equipment for heat treatment of materials using the phenomenon of induction or dielectric losses, other 8514.90  - parts 85.15             Machines and apparatuses for electric (including those with electric gas heating), laser or other light or photon, ultrasonic, electron beam, magnetic pulse or plasma arc low-temperature soldering, high-temperature soldering or welding, regardless of whether they can perform cutting operations or not; electrical machines and apparatuses for hot spraying of metals or cermets: - machines and apparatuses for high-temperature soldering or low-temperature soldering: 8515.11 -- soldering irons and soldering guns for low-temperature soldering 8515.19 -- other - machines and apparatuses for resistance welding of metals: 8515.21 -- automatic or semi-automatic 8515.29 -- other   --------------------------------------------------------------------  

     Section XVI Group 85 85.15 2 /17 1    

------------------------------------------------------------------- Commodity!  HS code !   position !          !   ------------------------------------------------------------------ machines and apparatus for arc welding (including plasma arc welding) of metals: 8515.31 -- automatic or semi-automatic 8515.39 -- other 8515.80 - machines and apparatus other 8515.90 - parts 85.16 Inertia-free or accumulating electric water heaters, submersible electric heaters;                    electrical space and ground heating equipment, electrothermal devices for hair care (for example, hair dryers, curlers, curling irons) and hand dryers; electric irons; other household electric heaters;                    electric heating resistances other than those specified in heading 85.45: 8516.10 - inertia-free or accumulating electric water heaters and submersible electric heaters - electrical appliances for space heating and ground heating: 8516.21 -- heat storage radiators 8516.29 -- other                       - electrothermal devices for curling and drying hair or electric hand dryers: 8516.31 -- electric hair dryers 8516.32 -- electrical appliances for hairdressing, other 8516.33 -- electric hand dryers 8516.40 - electric irons 8516.50 - microwave ovens 8516.60 - other ovens; electric stoves, electric cookers, electric boilers; grills and roasters - other electric heating appliances: 8516.71 -- for making coffee or tea 8516.72 -- toasters 8516.79 -- other 8516.80 - electric heating resistances 8516.90  - Parts 85.17 Electrical telephone or telegraphic apparatus for wired communication, including telephones with a wireless handset and apparatus for carrier-frequency wired communication systems or for digital wired communication systems; videophones: - telephones; videophones: 8517.11 -- telephones for wired communication with a wireless handset 8517.19 -- other - fax machines and teleprinters: 8517.21 -- fax machines 8517.22 -- teleprinters 8517.30 - switches for telephone or telegraphic communication   --------------------------------------------------------------------  

     Section XVI Group 85 85.17 2 /20 1    

------------------------------------------------------------------- Commodity!  HS code !   position !          !   ------------------------------------------------------------------- 8517.50 - devices for wired communication systems on a carrier frequency or for digital wired communication systems other 8517.80 - other devices 8517.90 - parts 85.18             Microphones and their stands; loudspeakers, mounted or not mounted in enclosures; headphones and headsets, whether or not combined with a microphone, and sets consisting of a microphone and one or more loudspeakers; electric audio frequency amplifiers; electrical sound amplification kits: 8518.10 - microphones and stands for them - loudspeakers, mounted or not mounted in enclosures: 8518.21 -- single loudspeakers mounted in enclosures 8518.22 -- sets of loudspeakers mounted in one enclosure 8518.29 -- other 8518.30  - headphones and headsets, combined or not combined with a microphone, and sets consisting of a microphone and one or more loudspeakers 8518.40 - electric sound frequency amplifiers 8518.50 - electric sound amplification sets 8518.90  - Parts 85.19               Electric playback devices (soundboards), record players, cassette players and other sound reproducing equipment that does not have sound recorders: 8519.10 - record players powered by a coin or token - other record players: 8519.21 -- without a loudspeaker 8519.29 -- other                       - electric playback devices (soundboards): 8519.31 -- with an automatic record changer 8519.39 -- other 8519.40 - sound reproduction devices for radio transmission - other sound reproduction equipment: 8519.92 -- pocket cassette players 8519.93 -- other cassette type 8519.99  -- other 85.20             Tape recorders and other sound recording equipment, including or not including sound reproducing devices: 8520.10 - voice recorders unable to operate without an external power source 8520.20 - answering machines - other tape recorders, including sound reproduction devices: 8520.32 -- with digital sound recording   --------------------------------------------------------------------  

     Section XVI Group 85 85.20 2 /24    

------------------------------------------------------------------- Commodity!  HS code !   position !          !   ------------------------------------------------------------------- 8520.33 -- other cassette type 8520.39 -- other 8520.90 - other 85.21 Video recording or video reproducing equipment, combined or not combined with a video tuner: 8521.10 - on magnetic tape 8521.90  - other 85.22 Parts and accessories suitable for use exclusively or mainly with equipment of headings 85.19-85.21: 8522.10 - pickups 8522.90 - other 85.23             Ready-made, unwritten media for recording sound or similar recording of other phenomena, except for products of group 37: - magnetic tapes: 8523.11 -- not more than 4 mm wide 8523.12  -- of a width exceeding 4 mm, but not exceeding 6.5 mm 8523.13 -- of a width exceeding 6.5 mm 8523.20 - magnetic discs 8523.30 - cards containing a magnetic strip 8523.90 - other 85.24 Gramophone records, tapes and other media for recording sound or similar recordings, recorded, including matrices and molds for making gramophone records, except for products of group 37: 8524.10 - records                       - discs for laser reading systems: 8524.31 -- for reproducing phenomena other than sound or image 8524.32 -- for reproducing sound only 8524.39 -- other 8524.40 - magnetic tapes for reproducing phenomena other than sound or image - other magnetic tapes: 8524.51 -- not more than 4 mm wide 8524.52 -- not more than 4 mm wide, but not more than over 6.5 mm 8524.53 -- width over 6.5 mm 8524.60  - magnetic stripe cards - other: 8524.91 -- for reproducing phenomena other than sound or image 8524.99 -- other   --------------------------------------------------------------------  

     Section XVI Group 85 85.25/27    

------------------------------------------------------------------- Commodity!  HS code !   position !          !   ------------------------------------------------------------------- 85.25 Transmitting equipment for radiotelephone, radiotelegraphic communication, radio broadcasting or television, including or not including reception, sound recording or reproducing equipment; television cameras; frame-by-frame video cameras and other recording video cameras; digital cameras: 8525.10 - transmitting equipment 8525.20 - transmitting equipment, including a receiving device 8525.30 - television cameras 8525.40 - frame-by-frame video cameras and other recording video cameras; digital cameras 85.26 Radar, radio navigation and remote control equipment: 8526.10 - radar equipment - other: 8526.91 -- radio navigation equipment 8526.92  -- radio remote control equipment 85.27 Reception equipment for radiotelephone, radiotelegraphic communication or broadcasting, combined or not combined in one housing with sound recording or reproducing equipment or clocks:                       - broadcast radios capable of operating without an external power source, including receivers capable of receiving radiotelephone or radiotelegraph signals: 8527.12 -- pocket cassette players with a radio receiver 8527.13 -- equipment combined with sound recording or reproducing devices, other 8527.19 -- other                       - broadcast radios capable of operating only from an external power source used in motor vehicles, including receivers capable of also receiving radiotelephone or radiotelegraph signals: 8527.21 -- combined with a device for recording or reproducing sound 8527.29 -- other                       - broadcast radio receivers, including receivers capable of also receiving radiotelephone or radiotelegraphic signals, other: 8527.31 -- combined with a device for recording or reproducing sound 8527.32 -- not combined with a device for recording or reproducing sound, but combined with a clock 8527.39 -- other 8527.90 -- other equipment   --------------------------------------------------------------------  

    Section XVI Group 85 Notes    

        Group 85 Electrical machinery and equipment, their parts;   sound recording and sound reproducing equipment, equipment for recording and reproducing television images and sound, their parts and accessories  

     Notes: 1.- This chapter does not include: (a) blankets, mattresses, pillows, foot warmers, electrically heated or similar articles; clothing, shoes or headphones or other electrically heated items used by humans; (b) glass products of heading 70.11; or (c) furniture with electric heating groups 94.         2.- Headings 85.01-85.04 do not include goods of headings 85.11, 85.12, 85.40, 85.41 or 85.42.         However, mercury-arc rectifiers with metal tanks are included in heading 85.04.         3.- Heading 85.09 includes only the following types of electromechanical machines commonly used in household use: (a) vacuum cleaners, including vacuum cleaners for dry and wet cleaning, polishers, food choppers, mixers, juicers for fruits and vegetables, having any weight; (b) other machines weighing not more than 20 kg.         However, this heading does not include fans or ventilation or recirculating fume hoods with a fan, with or without filters (heading 84.14), centrifugal tumble dryers (heading 84.21), dishwashers (heading 84.22), household washing machines (heading 84.50), roller or other ironing machines (heading 84.20 or 84.51), sewing machines (heading 84.52), electric scissors (heading 84.67) or electric heating appliances (heading 85.16).         4.- For the purposes of heading 85.34, the term "printed circuits" means circuits made by forming on an insulating substrate using any printing process (for example, electroplating, etching) or using "film" technology of conductors, contacts or other printed elements (for example, inductors, resistors, capacitances), separate or connected in no particular order, except for elements that are capable of creating, rectifying, modulating, or amplifying an electrical signal (for example, semiconductor elements).         The term "printed circuits" does not include circuits combined with elements other than those obtained during the printing process, as well as individual discrete resistors, capacitors, or inductors. However, printed circuits can be equipped with connecting elements manufactured using a different technology than printed circuits.         Thin- or thick-film circuits using passive and active elements obtained during the same technological process are included in heading 85.42.         5.- For the purposes of headings 85.41 and 85.42: (A) "Diodes, transistors and similar semiconductor devices" means semiconductor devices whose operation is based on a change in their resistance under the action of an electric field.         (B) "Electronic integrated circuits and microassemblies": (a) monolithic integrated circuits in which elements (diodes, transistors, resistors, capacitances, inter-element connections, etc.) are made mainly in the volume and on the surface of a semiconductor material (for example, doped silicon) and are inextricably linked;         (b) hybrid integrated circuits in which passive elements (resistors, capacitances, inter-element connections, etc.) made using thin- or thick-film technology processes and active elements (diodes, transistors, microcircuits) obtained using semiconductor technology processes are connected into a single inseparable whole on a single insulating substrate (glass, ceramics, etc.). Such circuits may also include discrete components.;         (c) microassemblies such as a molded block, micromodule or similar types, consisting of discrete, active or active and passive components, matched and interconnected.         In classifying the products named in this note, headings 85.41 and 85.42 have precedence over any other item in the Nomenclature, which may include these products in accordance, in particular, with their function.  

     Section XVI Group 85 85.01/02 1    

     6.- Records, tapes and other information carriers of heading 85.23 or 85.24, presented together with the equipment for which they are intended, are included in these headings.         This note does not apply to such media if they are presented together with goods other than the equipment for which they are intended.         7.- In heading 85.48, "spent primary cells, spent primary batteries and spent electric accumulators" include devices that are unsuitable for their intended purpose due to damage, wear or other reasons, as well as those that cannot be recharged.  

6.- Records, tapes and other information carriers of heading 85.23 or 85.24, presented together with the equipment for which they are intended, are included in these headings.         This note does not apply to such media if they are presented together with goods other than the equipment for which they are intended.         7.- In heading 85.48, "spent primary cells, spent primary batteries and spent electric accumulators" include devices that are unsuitable for their intended purpose due to damage, wear or other reasons, as well as those that cannot be recharged.  

     Notes to subheadings: 1.- Subheadings 8519.92 and 8527.12 include only cassette players with an integrated amplifier, without an integrated loudspeaker, capable of operating without an external power source, with dimensions not exceeding 170 x 100 x 45 mm.         2.- For the purposes of subheading 8542.10, the term "smart cards" means cards which have an integrated electronic integrated circuit (microprocessor) of any type in the form of a crystal and which may or may not have a magnetic stripe.     ------------------------------------------------------------------- Commodity!  HS code !   position !          !   ------------------------------------------------------------------- 85.01 Electric motors and generators (except for electric generating sets): 8501.10 - motors with a power not exceeding 37.5 W 8501.20 - universal AC motors/                         DC motors with a power exceeding 37.5 w - other DC motors; DC generators: 8501.31 -- with a power of not more than 750 W 8501.32 -- with a power of more than 750 W but not more than 75 kW 8501.33 -- with a power of more than 75 kW but not more than 375 kW 8501.34 -- with a power of more than 375 kW 8501.40 - single-phase alternating current motors - other multiphase alternating current motors: 8501.51 -- with a power of not more than 750 W 8501.52 -- with a power exceeding 750 W but not exceeding 75 kW 8501.53  -- with a capacity exceeding 75 kW - alternators (synchronous generators):              8501.61 -- with a capacity of not more than 75 kVA 8501.62 -- with a capacity of more than 75 kVA, but not more than 375 kVA 8501.63 -- with a capacity of more than 375 kVA, but not more than 750 kVA 8501.64 -- with a capacity of more than 750 kVA 85.02 Electric generating units and rotating electric converters:                       - electric generator sets with an internal combustion piston engine with compression ignition (diesel or semi-diesel): 8502.11 -- with a capacity of not more than 75 kVA 8502.12 -- with a capacity of more than 75 kVA but not more than 375 kVA 8502.13 -- with a capacity of more than 375 kVA 8502.20 -- electric generator sets with an internal combustion piston engine with spark ignition   --------------------------------------------------------------------  

     Section XVI Group 85 85.02 2 /06 1    

------------------------------------------------------------------- Commodity!  HS code !   position !          !   ------------------------------------------------------------------- - other electric generating sets: 8502.31 -- wind power 8502.39 -- other 8502.40 - electric rotating converters 85.03 8503.00 Parts intended exclusively or mainly for machines of heading 85.01 or 85.02.  85.04             Electric transformers, static electric converters (for example, rectifiers), inductors and chokes: 8504.10 - ballast elements for discharge lamps or tubes - liquid dielectric transformers: 8504.21 -- with a capacity of not more than 650 kVA 8504.22 -- with a capacity of more than 650 kVA, but not more than 10,000 kVA 8504.23 -- with a capacity of more than 10,000 kVA                       - other transformers: 8504.31 -- with a capacity of not more than 1 kVA 8504.32 -- with a capacity of more than 1 kVA, but not more than 16 kVA 8504.33 -- with a capacity of more than 16 kVA, but not more than 500 kVA 8504.34 -- with a capacity of more than 500 kVA 8504.40 - static converters 8504.50 - inductors and chokes other 8504.90 - parts 85.05 Electromagnets; permanent magnets and products designed to be converted into permanent magnets after magnetization;                    electromagnetic or permanent magnet clamping chucks, grippers and similar locking devices; electromagnetic clutches, clutches and brakes; electromagnetic lifting heads: - permanent magnets and articles designed to turn into permanent magnets after magnetization: 8505.11 -- metal 8505.19 -- other 8505.20 - electromagnetic clutches, clutches and brakes 8505.30 - electromagnetic lifting heads 8505.90 - other, including parts 85.06               Primary cells and primary batteries: 8506.10  - Dioxide-manganese 8506.30 - oxide-mercury 8506.40 - oxide-silver 8506.50 - lithium   --------------------------------------------------------------------  

     Section XVI Group 85 85.06 2 /11 1    

------------------------------------------------------------------- Commodity!  HS code !   position !          !   ------------------------------------------------------------------- 8506.60 - zinc-air 8506.80 - primary cells and other primary batteries 8506.90 - parts 85.07 Electric accumulators, including separators for them, rectangular (including square) or any other shape: 8507.10 - lead used to start piston engines 8507.20 - other lead accumulators 8507.30   - cadmium-nickel 8507.40 - iron-nickel 8507.80 - other batteries 8507.90 - parts [85.08] 85.09              Electromechanical household machines with built-in electric motors: 8509.10 - vacuum cleaners, including vacuum cleaners for dry and wet cleaning 8509.20 - polishers 8509.30 - kitchen waste disposers 8509.40 - food choppers and mixers;                          fruit or vegetable juicers 8509.80 - other appliances 8509.90 - parts 85.10 Electric shavers, hair clippers and hair removal devices with integrated electric motor: 8510.10 - electric shavers 8510.20 - hair clippers 8510.30 - hair removal devices 8510.90   - parts 85.11 Electrical equipment for igniting or starting internal combustion engines with ignition from a spark or from compression of a combustible mixture (for example, magneto, ignition coils, spark plugs, glow plugs, starters); generators (for example, direct current and alternating current) and interrupters of the type used with such engines: 8511.10 - spark plugs 8511.20 - magneto of various types; magnetic flywheels 8511.30 - distributors; ignition coils   --------------------------------------------------------------------  

     Section XVI Group 85 85.11 2 /15 1    

------------------------------------------------------------------- Commodity!  HS code !   position !          !   ------------------------------------------------------------------- 8511.40 - starters and starter generators 8511.50 - other generators 8511.80 - other equipment 8511.90 - parts 85.12             Electric lighting or alarm equipment (other than articles of heading 85.39), windscreen wipers, de-icers and de-foggers used on bicycles or motor vehicles: 8512.10  - lighting or visual alarm devices used on bicycles 8512.20 - other lighting or visual alarm devices 8512.30 - acoustic alarm devices 8512.40 - windscreen wipers, de-icers and de-foggers 8512.90  - parts 85.13 Portable electric lanterns powered by their own energy source (for example, dry cell batteries, accumulators, magneto), other than lighting equipment of heading 85.12: 8513.10 - lanterns 8513.90 - parts 85.14             Industrial or laboratory electric furnaces and chambers (including those operating on the basis of induction or dielectric loss phenomena); industrial or laboratory equipment for heat treatment of materials using the phenomenon of induction or dielectric losses: 8514.10 - furnaces and resistance chambers 8514.20 - furnaces and chambers operating on the basis of the phenomenon of induction or dielectric losses 8514.30 - furnaces and chambers other 8514.40  - equipment for heat treatment of materials using the phenomenon of induction or dielectric losses, other 8514.90  - parts 85.15             Machines and apparatuses for electric (including those with electric gas heating), laser or other light or photon, ultrasonic, electron beam, magnetic pulse or plasma arc low-temperature soldering, high-temperature soldering or welding, regardless of whether they can perform cutting operations or not; electrical machines and apparatuses for hot spraying of metals or cermets: - machines and apparatuses for high-temperature soldering or low-temperature soldering: 8515.11 -- soldering irons and soldering guns for low-temperature soldering 8515.19 -- other - machines and apparatuses for resistance welding of metals: 8515.21 -- automatic or semi-automatic 8515.29 -- other   --------------------------------------------------------------------  

     Section XVI Group 85 85.15 2 /17 1    

------------------------------------------------------------------- Commodity!  HS code !   position !          !   ------------------------------------------------------------------ machines and apparatus for arc welding (including plasma arc welding) of metals: 8515.31 -- automatic or semi-automatic 8515.39 -- other 8515.80 - machines and apparatus other 8515.90 - parts 85.16 Inertia-free or accumulating electric water heaters, immersion electric heaters;                    electrical space and ground heating equipment, electrothermal devices for hair care (for example, hair dryers, curlers, curling irons) and hand dryers; electric irons; other household electric heaters;                    electric heating resistances other than those specified in heading 85.45: 8516.10 - inertia-free or accumulating electric water heaters and submersible electric heaters - electrical appliances for space heating and ground heating: 8516.21 -- heat storage radiators 8516.29 -- other                       - electrothermal devices for curling and drying hair or electric hand dryers: 8516.31 -- electric hair dryers 8516.32 -- electrical appliances for hairdressing, other 8516.33 -- electric hand dryers 8516.40 - electric irons 8516.50 - microwave ovens 8516.60 - other ovens; electric stoves, electric cookers, electric boilers; grills and roasters - other electric heating appliances: 8516.71 -- for making coffee or tea 8516.72 -- toasters 8516.79 -- other 8516.80 - electric heating resistances 8516.90  - Parts 85.17 Electrical telephone or telegraphic apparatus for wired communication, including telephones with a wireless handset and apparatus for carrier-frequency wired communication systems or for digital wired communication systems; videophones: - telephones; videophones: 8517.11 -- telephones for wired communication with a wireless handset 8517.19 -- other - fax machines and teleprinters: 8517.21 -- fax machines 8517.22 -- teleprinters 8517.30 - switches for telephone or telegraphic communication   --------------------------------------------------------------------  

     Section XVI Group 85 85.17 2 /20 1    

------------------------------------------------------------------- Commodity!  HS code !   position !          !   ------------------------------------------------------------------- 8517.50 - devices for wired communication systems on a carrier frequency or for digital wired communication systems other 8517.80 - other devices 8517.90 - parts 85.18             Microphones and their stands; loudspeakers, mounted or not mounted in enclosures; headphones and headsets, whether or not combined with a microphone, and sets consisting of a microphone and one or more loudspeakers; electric audio frequency amplifiers; electrical sound amplification kits: 8518.10 - microphones and stands for them - loudspeakers, mounted or not mounted in enclosures: 8518.21 -- single loudspeakers mounted in enclosures 8518.22 -- sets of loudspeakers mounted in one enclosure 8518.29 -- other 8518.30  - headphones and headsets, combined or not combined with a microphone, and sets consisting of a microphone and one or more loudspeakers 8518.40 - electric sound frequency amplifiers 8518.50 - electric sound amplification sets 8518.90  - Parts 85.19               Electric playback devices (soundboards), record players, cassette players and other sound reproducing equipment that does not have sound recorders: 8519.10 - record players powered by a coin or token - other record players: 8519.21 -- without a loudspeaker 8519.29 -- other                       - electric playback devices (soundboards): 8519.31 -- with an automatic record changer 8519.39 -- other 8519.40 - sound reproduction devices for radio transmission - other sound reproduction equipment: 8519.92 -- pocket cassette players 8519.93 -- other cassette type 8519.99  -- other 85.20             Tape recorders and other sound recording equipment, including or not including sound reproducing devices: 8520.10 - voice recorders unable to operate without an external power source 8520.20 - answering machines - other tape recorders, including sound reproduction devices: 8520.32 -- with digital sound recording   --------------------------------------------------------------------  

     Section XVI Group 85 85.20 2 /24    

------------------------------------------------------------------- Commodity!  HS code !   position !          !   ------------------------------------------------------------------- 8520.33 -- other cassette type 8520.39 -- other 8520.90 - other 85.21 Video recording or video reproducing equipment, combined or not combined with a video tuner: 8521.10 - on magnetic tape 8521.90  - other 85.22 Parts and accessories suitable for use exclusively or mainly with equipment of headings 85.19-85.21: 8522.10 - pickups 8522.90 - other 85.23             Ready-made, unwritten media for recording sound or similar recording of other phenomena, except for products of group 37: - magnetic tapes: 8523.11 -- not more than 4 mm wide 8523.12  -- of a width exceeding 4 mm, but not exceeding 6.5 mm 8523.13 -- of a width exceeding 6.5 mm 8523.20 - magnetic discs 8523.30 - cards containing a magnetic strip 8523.90 - other 85.24 Gramophone records, tapes and other media for recording sound or similar recordings, recorded, including matrices and molds for making gramophone records, except for products of group 37: 8524.10 - records                       - discs for laser reading systems: 8524.31 -- for reproducing phenomena other than sound or image 8524.32 -- for reproducing sound only 8524.39 -- other 8524.40 - magnetic tapes for reproducing phenomena other than sound or image - other magnetic tapes: 8524.51 -- not more than 4 mm wide 8524.52 -- not more than 4 mm wide, but not more than over 6.5 mm 8524.53 -- width over 6.5 mm 8524.60  - magnetic stripe cards - other: 8524.91 -- for reproducing phenomena other than sound or image 8524.99 -- other   --------------------------------------------------------------------  

     Section XVI Group 85 85.25/27    

------------------------------------------------------------------- Commodity!  HS code !   position !          !   ------------------------------------------------------------------- 85.25 Transmitting equipment for radiotelephone, radiotelegraphic communication, radio broadcasting or television, including or not including reception, sound recording or reproducing equipment; television cameras; frame-by-frame video cameras and other recording video cameras; digital cameras: 8525.10 - transmitting equipment 8525.20 - transmitting equipment, including a receiving device 8525.30 - television cameras 8525.40 - frame-by-frame video cameras and other recording video cameras; digital cameras 85.26 Radar, radio navigation and remote control equipment: 8526.10 - radar equipment - other: 8526.91 -- radio navigation equipment 8526.92  -- radio remote control equipment 85.27 Reception equipment for radiotelephone, radiotelegraphic communication or broadcasting, combined or not combined in one housing with sound recording or reproducing equipment or clocks:                       - broadcast radios capable of operating without an external power source, including receivers capable of receiving radiotelephone or radiotelegraph signals: 8527.12 -- pocket cassette players with a radio receiver 8527.13 -- equipment combined with sound recording or reproducing devices, other 8527.19 -- other                       - broadcast radios capable of operating only from an external power source used in motor vehicles, including receivers capable of also receiving radiotelephone or radiotelegraph signals: 8527.21 -- combined with a device for recording or reproducing sound 8527.29 -- other                       - broadcast radio receivers, including receivers capable of also receiving radiotelephone or radiotelegraphic signals, other: 8527.31 -- combined with a device for recording or reproducing sound 8527.32 -- not combined with a device for recording or reproducing sound, but combined with a clock 8527.39 -- other 8527.90 -- other equipment   --------------------------------------------------------------------  

Law of the Republic of Kazakhstan dated February 3, 2004 No. 525

       The Republic of Kazakhstan should accede to the International Convention on the Harmonized Commodity Description and Coding System, signed in Brussels on June 14, 1983, and the Protocol amending the International Convention on the Harmonized Commodity Description and Coding System, signed in Brussels on June 24, 1986.

President    

Republic of Kazakhstan     

© 2012. RSE na PHB "Institute of Legislation and Legal Information of the Republic of Kazakhstan" of the Ministry of Justice of the Republic of Kazakhstan  

 Constitution Law Code Standard Decree Order Decision Resolution Lawyer Almaty Lawyer Legal service Legal advice Civil Criminal Administrative cases Disputes Defense Arbitration Law Company Kazakhstan Law Firm Court Cases