On the Technical Regulation of the Eurasian Economic Union “On the Safety of Paints and Varnishes”
a) the Technical Regulation shall enter into force:
in the territories of the Republic of Armenia, the Republic of Belarus, the Republic of Kazakhstan and the Russian Federation on January 1, 2028;
in the territory of the Kyrgyz Republic on January 1, 2032.
During the period from January 1, 2028 to January 1, 2032, paints and varnishes manufactured and placed on the market in the territory of the Kyrgyz Republic in accordance with the legislation of the Kyrgyz Republic shall not be subject to marking with the single product circulation mark on the market of the Eurasian Economic Union;
b) the limit for lead content calculated on a dry residue basis, provided for in paragraph 12 of the Technical Regulation, shall enter into force upon expiry of 60 months from the date of entry into force of the Technical Regulation, but not earlier than the entry into force of a Decision of the Board of the Eurasian Economic Commission providing for the inclusion of the relevant interstate standards containing rules and methods of research (testing) and measurements, including sampling rules, necessary for determining lead content calculated on a dry residue basis in paints and varnishes, in the list of standards specified in paragraph 4 of the Protocol on Technical Regulation within the Eurasian Economic Union (Annex No. 9 to the Treaty on the Eurasian Economic Union of May 29, 2014).
From the date of entry into force of the Technical Regulation and for a period of 36 months, the lead content calculated on a dry residue basis in the paints and varnishes specified in paragraph 12 of the Technical Regulation shall not exceed 0.5 percent.
Upon expiry of 36 months from the date of entry into force of the Technical Regulation and until the entry into force of the limit for lead content calculated on a dry residue basis, provided for in paragraph 12 of the Technical Regulation, the lead content calculated on a dry residue basis in paints and varnishes shall not exceed 0.05 percent;
c) when adopting a Decision of the Council of the Eurasian Economic Commission on the Technical Regulation of the Eurasian Economic Union on the Safety of Construction Materials and Products, the said Decision shall provide for a provision concerning the non-application of paragraph 10 of the Technical Regulation.
a) jointly with the Eurasian Economic Commission, to continue work on determining uniform fire safety and radiation safety requirements for paints and varnishes and developing the relevant interstate standards containing rules and methods of research (testing) and measurements, including sampling rules, necessary for the application and fulfilment of the said requirements, as well as research (testing) and measurement methods certified (validated) and approved in accordance with the legislation of the Member States of the Eurasian Economic Union, for the purpose of introducing amendments to the Technical Regulation with regard to establishing such requirements and including the relevant interstate (regional) standards in the list of standards specified in paragraph 4 of the Protocol on Technical Regulation within the Eurasian Economic Union (Annex No. 9 to the Treaty on the Eurasian Economic Union of May 29, 2014);
b) to submit to the Eurasian Economic Commission, by July 1, 2026, information on the state authorities authorized to carry out state registration of paints and varnishes.
For the Republic of Armenia For the Republic of Belarus For the Republic of Kazakhstan For the Kyrgyz Republic For the Russian Federation M. Grigoryan N. Petkevich S. Zhumangarin D. Amangeldiev A. Overchuk ADOPTED By Decision of the Council of the Eurasian Economic Commission of May 20, 2026 No. 65 TECHNICAL REGULATION OF THE EURASIAN ECONOMIC UNION “ON THE SAFETY OF PAINTS AND VARNISHES” (TR EAEU 053/2026)
I. Scope of Application
a) paints;
b) varnishes (including varnishes containing matting agents and dyes);
c) primers;
d) primer-enamels;
e) water-dispersion paints and varnishes;
f) multi-component paints and varnishes;
g) powder paints and varnishes;
h) paints and varnishes in aerosol packaging;
i) enamels;
j) stains;
k) impregnating agents;
l) wood preservatives;
m) wood stains;
n) decorative plasters;
o) putties;
p) drying oils.
a) varnishes and enamels that are perfumery and cosmetic products;
b) semi-finished varnishes, including those used in the food industry;
c) resins;
d) solvents, diluents and thinners;
e) hardeners, driers and curing accelerators for paints and varnishes;
f) printing inks, paints for artistic and decorative works, watercolour paints;
g) materials for road marking.
II. Basic Concepts
III. Identification of Paints and Varnishes
IV. Rules for Placing Paints and Varnishes on the Union Market
V. Safety Requirements for Paints and Varnishes
VI. Requirements for the Marking of Paints and Varnishes
VII. Ensuring Compliance of Paints and Varnishes with Safety Requirements
VIII. Conformity Assessment of Paints and Varnishes with the Requirements of the Technical Regulation
IX. Marking of Paints and Varnishes with the Single Product Circulation Mark on the Union Market
X. Requirements for the Safety Data Sheet for Paints and Varnishes
ANNEX to the Technical Regulation of the Eurasian Economic Union “On the Safety of Paints and Varnishes” (TR EAEU 053/2026) Sanitary-Epidemiological and Hygienic Requirements for Paints and Varnishes
Table 1 Requirements for Safety Indicators of Paints and Varnishes
Permissible level Note Odour of the air when assessing finished coatings (in construction, for furniture products, for repair painting of automobiles) Not more than 2 points For paints and varnishes used in industrial and civil construction, drinking water supply, the food and furniture industries, as well as for repair painting of automobiles Odour of an aqueous extract from a sample of paint and varnish applied to a glass plate and dried in accordance with the instructions for use (when used in drinking water supply) Not more than 2 points Odour of extracts in model solutions simulating food products, from a sample of paint and varnish applied to a glass plate and dried in accordance with the instructions for use Not more than 1 point Permissible level Note Aqueous extract from a sample of paint and varnish applied to a glass plate and dried in accordance with the instructions for use (when used in drinking water supply): For paints and varnishes used in drinking water supply and the food industry taste Not more than 2 points colour Not more than 20 (35)* degrees turbidity Not more than 2.6 (3.5)* FNU (formazin turbidity units) and not more than 1.5 (2)* mg/l (kaolin) Extracts in model solutions simulating food products, from a sample of paint and varnish applied to a glass plate and dried in accordance with the instructions for use: taste Not permitted colour Not permitted turbidity Not permitted Permissible level Note Acute toxicity upon oral administration of extracts from paints and varnishes Aqueous model media in contact with paints and varnishes (extracts) shall not have a pronounced general toxic effect For paints and varnishes used in drinking water supply and the food industry Irritant effect of paints and varnishes on the skin under the recommended conditions of use: on the skin 0–4 points (an irritant effect of 2 to 4 points is permitted provided that the marking contains a requirement to use personal hand protection equipment and appropriate warning notices) For paints and varnishes used in industrial and civil construction, the furniture industry, as well as for repair painting of automobiles Irritant effect of model media in contact with paints and varnishes (extracts) under the recommended conditions of use: on the skin; on mucous membranes 0 points; 0 points For paints and varnishes used in drinking water supply and the food industry Sensitizing effect An allergenic effect is permitted provided that the marking specifies a list of safety and precautionary measures, as well as requirements for the use of personal protective equipment Resorptive effect through the skin, single and repeated exposure Absence of a resorptive effect and clinical signs of intoxication Permissible level Note Assessment of the survival period of pathogenic and sanitary-indicator microorganisms (test cultures) on paint and varnish coatings Absence of growth and development of microflora, including pathogenic microflora, on the surface of the paint and varnish coating For paints and varnishes intended for painting the interior surfaces of premises, buildings and structures for which a wet disinfection regime is provided Table 2 Permissible Levels of Migration of Harmful Substances from Paint and Varnish Coatings into the Air During Sanitary-Epidemiological and Hygienic Assessment of the Main Types of Paints and Varnishes
Type of paint and varnish Name of harmful substance Permissible level of migration into the air, mg/m³ 1. Cellulose acetobutyrate formaldehyde 0.01 acetic acid 0.06 xylene* 0.1 2. Polyacrylic formaldehyde 0.01 methyl methacrylate 0.01 xylene* 0.1 3. Styrene-acrylic formaldehyde 0.01 methyl methacrylate 0.01 styrene 0.002 4. Alkyd-acrylic formaldehyde 0.01 methyl methacrylate 0.01 styrene 0.002 phthalic anhydride 0.02 xylene* 0.1 5. Alkyd: glyptal, pentaphthalic, melamine, nitrocellulose formaldehyde 0.01 phthalic anhydride 0.02 xylene* 0.1 6. Bituminous formaldehyde 0.01 phenol 0.003 xylene* 0.1 7. Butadiene-styrene, rubber-based, chlorinated rubber formaldehyde 0.01 styrene 0.002 dibutyl phthalate 0.1 xylene* 0.1 8. Vinyl acetate formaldehyde 0.01 acetic acid 0.06 dibutyl phthalate 0.1 9. Polyvinyl acetal, rosin-based, oil-based formaldehyde 0.01 xylene* 0.1 10. Silicone-based formaldehyde 0.01 hydrogen chloride 0.1 toluene 0.3 11. Oil and alkyd-styrene formaldehyde 0.01 phthalic anhydride 0.02 styrene 0.002 xylene 0.1 12. Urea-based formaldehyde 0.01 xylene 0.1 methyl alcohol 0.5 13. Unsaturated polyester powder formaldehyde 0.01 styrene 0.002 14. Polyurethane formaldehyde 0.01 hydrogen cyanide 0.01 phenol 0.003 xylene* 0.1 15. Polyurethane-acrylate formaldehyde 0.01 hydrogen cyanide 0.01 methyl methacrylate 0.01 benzene 0.1 16. Phenol-alkyd formaldehyde 0.01 phenol 0.003 phthalic anhydride 0.02 xylene 0.1 17. Phenolic and phenol-formaldehyde formaldehyde 0.01 phenol 0.003 xylene 0.1 18. Perchlorovinyl and polyvinyl chloride formaldehyde 0.01 hydrogen chloride 0.1 dibutyl phthalate 0.1 xylene 0.1 19. Vinyl chloride copolymer formaldehyde 0.01 hydrogen chloride 0.1 dibutyl phthalate 0.1 methyl methacrylate 0.01 styrene 0.002 xylene 0.1 20. Epoxy formaldehyde 0.01 epichlorohydrin 0.04 xylene* 0.1 Note. For types of paints and varnishes not included in Table 2 of this Annex, the permissible levels of migration of harmful substances from paint and varnish coatings into the air shall be determined on the basis of the formulation of the paints and varnishes, taking into account their main components and the permissible levels of migration of harmful substances established in Table 2 of this Annex.